RX600 Datasheet, PDF (4/9 Pages) Fujitsu Component Limited. – Fujitsu PRIMERGY RX600 S6 Quad socket 4 U rack server

Data Sheet Fujitsu PRIMERGY RX600 S6 Quad socket 4 U rack server
Interfaces
LAN / Ethernet
Service LAN (RJ45)
Onboard or integrated Controller
RAID controller
LAN Controller
Remote Management Controller
Trusted Platform Module (TPM)
Slots
PCI-Express 2.0 x4 (mech. x8)
PCI-Express 2.0 x8
PCI-Express 2.0 x16
PCI-Express x4 (mech. x8)
Storage drive bays
Accessible drive bays
General system information
Number of fans
Fan configuration
Operating panel
Operating buttons
Status LEDs
Service display
BIOS
BIOS features
4 x Gbit/s Ethernet (RJ45)
1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port
8 Port SAS RAID 0/1 or RAID 5/6 controller as option
See under Components RAID controller
2 x Intel® 82576, 4 x 10/100/1000 Mbit/s Ethernet, TCP/IP acceleration, PXE boot via LAN from PXE server
Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller), IPMI 2.0
compatible
Infineon / separate module; TCG V1.2 compliant (option)
3 x Full height (2 x ½ length, 1 x ¾ length)
4 x Full height (all ¾ length, 2x hot-plug)
1 x Full height (all ¾ length)
2 x Half height (all ½ length)
8 x 2.5-inch hot-plug
1 x 5.25/0.5-inch for CD-RW/DVD
1 x 5.25/1.6-inch for backup devices
8
hot-plug
On/off switch
NMI button
Reset button
ID button
System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (orange / yellow)
Identification (blue)
ServerView Local Service Display (LSD)
ROM based setup utility
Recovery BIOS
BIOS settings save and restore
Local BIOS update from USB device
Online update tools for main Windows and Linux versions
Local and remote update via ServerView Update Manager
SMBIOS V2.4
Remote PXE boot support
Remote iSCSI boot support
Page 4 / 9
www.fujitsu.com/fts