RX300 Datasheet, PDF (4/10 Pages) Fujitsu Component Limited. – Fujitsu PRIMERGY RX300 S6 Dual socket 2 U rack server

Data Sheet Fujitsu PRIMERGY RX300 S6 Dual socket 2 U rack server
Memory protection
Memory notes
Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Hot-spare memory support
Memory Mirroring support
Memory Mirroring with identical modules in each of 2 channels (2 modules per bank), Hot-spare or Performance
mode with identical modules in all three channels (3 per bank)
Memory Modules Independent Mode
2 GB (1 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3 LV, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (1 module(s) 16 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
16 GB (1 module(s) 16 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
32 GB (1 module(s) 32 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
Memory Modules Mirrored Mode
4 GB (2 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (2 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (2 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (2 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (2 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
32 GB (2 module(s) 16 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
64 GB (2 module(s) 32 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
Memory Modules Spare or Performance 6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
Mode
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
12 GB (3 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
24 GB (3 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
48 GB (3 module(s) 16 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
96 GB (3 module(s) 32 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
Interfaces
USB ports
Graphics (15-pin)
Serial 1 (9-pin)
Serial 2 (9-pin)
LAN / Ethernet (RJ-45)
Service LAN (RJ45)
10 x USB 2.0 (3x front, 4x rear, 2x internal for backup devices plus 1x USB stick)
2 x VGA (thereof 1x front optional)
1 x serial RS-232-C, usable for iRMC or system or shared
1 x serial RS-232-C
2 x Gbit/s Ethernet
1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID controller
SATA Controller
LAN Controller
Remote Management Controller
Trusted Platform Module (TPM)
Integrated RAID 0/1 or RAID 5/6 controller for SAS base units (occupies one PCIe slot, if at least 1 HDD is configured).
See under Components RAID controller
ICH10B, with two SATA channels for DVD + backup
Intel® 82575EB , 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), VT-c (I/O acceleration and VMDq), PXE boot via
LAN from PXE server, iSCSI boot (also diskless) via onboard LAN
Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller), IPMI 2.0
compatible
Infineon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 2.0 x4 (mech. x8)
PCI-Express 2.0 x8
Slot Notes
5 x Low profile
2 x Low profile , both are notched x8 slot as well for x16 cards
Two of four PCI-Express Gen2 x4 slots can be used as x8, if neighbour slot is empty.
One PCIe Gen2 x4 slot may be occupied with a modular RAID controller if configured.
Page 4 / 10
www.fujitsu.com/fts