MB39A123 Datasheet, PDF (38/44 Pages) Fujitsu Component Limited. – 6 ch DC/DC Converter IC with Synchronous Rectification

MB39A123
■ USAGE PRECAUTIONS
• Printed circuit board ground lines should be set up with consideration for common impedance.
• Take appropriate static electricity measures.
• Containers for semiconductor materials should have anti-static protection or be made of conductive material.
• After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.
• Work platforms, tools, and instruments should be properly grounded.
• Working personnel should be grounded with resistance of 250 kΩ to 1 MΩ between body and ground.
• Do not apply a negative voltages.
• The use of negative voltages below −0.3 V may create parasitic transistors on LSI lines, which can cause
abnormal operation.
■ ORDERING INFORMATION
Part number
MB39A123PMT-❏❏❏E1
MB39A123PVK-❏❏❏E1
Package
48-pin plastic LQFP
(FPT-48P- M26)
48-pin plastic BCC
(LCC-48P-M08)
Remarks
Lead Free version
Lead Free version
■ EV BOARD ORDERING INFORMATION
EV board part No.
MB39A123EVB-02
EV board version No.
Board Rev.1.0
Remarks
LQFP-48P
■ RoHS COMPLIANCE INFORMATION OF LEAD (Pb) FREE VERSION
The LSI products of Fujitsu with “E1” are compliant with RoHS Directive , and has observed the standard of
lead, cadmium, mercury, Hexavalent chromium, polybrominated biphenyls (PBB) , and polybrominated diphenyl
ethers (PBDE) .
The product that conforms to this standard is added “E1” at the end of the part number.
38