MB3881 Datasheet, PDF (38/40 Pages) Fujitsu Component Limited. – 8-ch DC/DC Converter IC with Synchronous Rectifier for Voltage Step-up and Step-down

MB3881
s USAGE PRECAUTION
1. Never use setting exceeding maximum rated conditions.
Exceeding maximum rated conditions may cause permanent damage to the LSI.
Also, it is recommended that recommended operating conditions be observed in normal use.
Exceeding recommended operating conditions may adversely affect LSI reliability.
2. Use this device within recommended operating conditions.
Recommended operating conditions are values within which normal LSI operation is warranted.
Standard electrical characteristics are warranted within the range of recommended operating conditions and
within the listed conditions for each parameter.
3. Printed circuit board ground lines should be set up with consideration for common
impedance.
4. Take appropriate static electricity measures.
• Containers for semiconductor materials should have anti-static protection or be made of conductive material.
• After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.
• Work platforms, tools, and instruments should be properly grounded.
• Working personnel should be grounded with resistance of 250 kΩ to 1 MΩ between body and ground.
5. Do not apply negative voltages.
The use of negative voltages below –0.3 V may create parasitic transistors on LSI lines, which can cause
abnormal operation.
s ORDERING INFORMATION
Part number
MB3881PFF
Package
64-pin plastic LQFP
(FPT-64P-M16)
Remarks
38