MB15G000 Datasheet, PDF (3/19 Pages) Fujitsu Component Limited. – ASTRO-NT (for RF front-end LSI-Based on PLL, Analog Macro)

MB15G000 Series
s ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Symbol
Unit
Min.
Max.
Power supply voltage *¹
VCC *²
VCC *³
–0.5
–0.5
4.0
V
6.0
V
Input voltage *¹
VIN
–0.5
VCC + 0.5
V
Output current
Iout
–10
10
mA
Storage temperature
Tstg
–55
+125
°C
*1:Voltage values are based on GND = 0 V
*2:Using 3V macro specifications
*3:Using 5V macro specifications
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Value
Symbol
Unit
Min.
Typ.
Max.
VCC *^2,*³
2.7
3.0
3.3
V
Power supply voltage *¹
VCC *^2,*⁴
4.5
5.0
5.5
V
GND
—
0
—
V
Input voltage
VIN
GND
—
VCC
V
Operating temperature
Ta
–40
—
+85
°C
*1:Voltage values are based on GND = 0 V
*2:The range of operating voltage should be defined depends on circuit configuration.
For models not using standard 3V or 5V specifications, maximum ratings and recommended operating conditions
are set according to circuit use.
*3:Using 3V macro specifications
*4:Using 5V macro specifications
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
3