FTP-62DMCL101 Datasheet, PDF (3/6 Pages) Fujitsu Component Limited. – battery drive, FTP-60D Series 2” high speed thermal printer

FTP-62DMCL101
n SPECIFICATIONS
Item
FTP-62DMCL101
Specification
Interface
Conforms to RS232C / USB
Operating
Voltage
For print head
For motor
4.2 VDC to 9.5 V, average current 0.87A (0.93),peak value
Printing ratio: 12.5%, printing speed 75mm/sec. at 7.2 V
4.2 to 9.5VDC, 1A maximum
For logic
3.0 to 5.25VDC, 0.1 A maximum
Printer mechanism
Dimensions
Interface board
69.5 x 46 x 19mm (WxDxH)
TBA
Weight
Printer mechanism
Interface board
Approximately 29 g
TBA
Head life
Pulse resistance: 100 million pulses/dot (under our standard
conditions). Abrasion resistance: paper traveling distance
50km (print ratio: 25% or less)
Operating temperature* 0˚C to +50˚C
Operating ^{Operating humidity}
environment _{Storage temperature}
20 to 85% RH (no condensation)
-20˚C to +60˚C (paper not included)
Storage humidity
5 to 95% RH (no condensation )
Detection
function
Head temperature
detection
Detected by thermistor
Paper out/mark detection Detected by photo-interrupte r
High sensitive paper:
TF60KS-E4 (Nippon Paper)
Standard paper:
TK50KS-E (Nippon Paper)
PD150R (Oji Paper)
FTP-020P0701 (58mm)
Recommended thermal sensitive paper
Medium life storage paper:
TK60KS-F1 (Nippon Paper)
FTP-020P0704 (58mm)
PD170R (Oji Paper)
P220VBB-1 (Mitsubishi
Paper)
Long life storage paper:
PD160R-N (Oji Paper)
AFP-235 (Mitsubishi Paper)
TP50KJ-R (Nippon Paper)
HA220AA (Nippon Paper)
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)
3