MB39A102_05 Datasheet, PDF (29/32 Pages) Tyco Electronics – 4-ch DC/DC Converter IC

MB39A102
■ USAGE PRECAUTION
• Printed circuit board ground lines should be set up with consideration for common impedance.
• Take appropriate static electricity measures.
• Containers for semiconductor materials should have anti-static protection or be made of conductive material.
• After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.
• Work platforms, tools, and instruments should be properly grounded.
• Working personnel should be grounded with resistance of 250 kΩ to 1 MΩ between body and ground.
• Do not apply negative voltages.
The use of negative voltages below –0.3 V may create parasitic transistors on LSI lines, which can cause
abnormal operation.
■ ORDERING INFORMATION
Part number
MB39A102PFT
MB39A102PV3
Package
30-pin plastic TSSOP
(FPT-30P-M04)
32-pad plastic BCC
(LCC-32P-M15)
Remarks
29