MB3817_03 Datasheet, PDF (26/28 Pages) Fujitsu Component Limited. – Switching Regulator Controller

MB3817
s NOTES ON USE
• Take account of common impedance when designing the earth line on a printed wiring board.
• Take measures against static electricity.
- For semiconductors, use antistatic or conductive containers.
- When storing or carrying a printed circuit board after chip mounting, put it in a conductive bag or container.
- The work table, tools and measuring instruments must be grounded.
- The worker must put on a grounding device containing 250 kΩ to 1 MΩ resistors in series.
• Do not apply a negative voltage
- Applying a negative voltage of −0.3 V or less to an LSI may generate a parasitic transistor, resulting in
malfunction.
s ORDERING INFORMATION
Part number
MB3817PFV
Package
16-pin Plastic SSOP
(FPT-16P-M05)
Remarks
26