MB90671 Datasheet, PDF (2/124 Pages) Fujitsu Component Limited. – 16-bit Proprietary Microcontroller

MB90670/675 Series
s FEATURES
• Clock
Embedded PLL clock multiplication circuit
Operating clock (PLL clock) can be selected from divided-by-2 of oscillation or one to four times the oscillation
(at oscillation of 4 MHz, 4 MHz to 16 MHz).
Minimum instruction execution time of 62.5 ns (at oscillation of 4 MHz, four times the PLL clock, operation at
Vcc of 5.0 V)
• CPU addressing space of 16 Mbytes
Internal addressing of 24-bit
External accessing can be performed by selecting 8/16-bit bus width (external bus mode)
• Instruction set optimized for controller applications
Rich data types (bit, byte, word, long word)
Rich addressing mode (23 types)
High code efficiency
Enhanced precision calculation realized by the 32-bit accumulator
• Instruction set designed for high level language (C) and multi-task operations
Adoption of system stack pointer
Enhanced pointer indirect instructions
Barrel shift instructions
• Enhanced execution speed
4-byte instruction queue
• Enhanced interrupt function
8 levels, 32 factors
• Automatic data transmission function independent of CPU operation
Extended intelligent I/O service function (EI²OS)
• Low-power consumption (standby) mode
Sleep mode (mode in which CPU operating clock is stopped)
Timebase timer mode (mode in which other than oscillation and timebase timer are stopped)
Stop mode (mode in which oscillation is stopped)
CPU intermittent operation mode
Hardware standby mode
• Process
CMOS technology
• I/O port
MB90670 series: Maximum of 65 ports
MB90675 series: Maximum of 84 ports
• Timer
Timebase timer/watchdog timer: 1 channel
8/16-bit PPG timer: 8-bit × 2 channels or 16-bit × 1 channel
16-bit reload timer: 2 channels
24-bit free-run timer: 1 channel
• Input capture (ICU)
Generates an interrupt request by latching a 24-bit free-run timer counter value upon detection of an edge
input to the pin.
• Output compare (OCU)
Generates an interrupt request and reverse the output level upon detection of a match between the 24-bit free-
run timer counter value and the compare setting value.
• I²C interface (in MB90675 series only)
Serial I/O port for supporting Inter IC BUS
(Continued)
2