MB86L10A Datasheet, PDF (2/2 Pages) Fujitsu Component Limited. – Ideal for Multimode, Multiband LTE, UMTS and EDGE Mobile Handsets

The Fujitsu 2G/3G/LTE Transceiver MB86L10A
Applications
• Mobile phones
• Mobile Internet devices
• Data cards
• Embedded modules
Features
• 6.5mm × 9.0mm × 1.0mm LGA package
• First multi-mode transceiver to eliminate both TX and RX
inter-stage SAW filters, as well as LNAs from 3G and 4G
paths
• GSM bands: GSM850, EGSM900, DCS1800, PCS1900
• Support for EGPRS Class 34 operation
• WCDMA bands: I, II, III, IV, V, VI, VIII, IX, X, and XI
• WCDMA FDD HSDPA category 10
• WCDMA FDD HSUPA with 4 E-DPDCH category 6
• LTE-FDD bands: 1, 3, 4, 6, 7, 8, 9, 10, 11, 13, and 17
• LTE-TDD bands: 38 or 40
• LTE category 3 data rate
• 14 differential RF inputs for the receiver
– 9 differential RF inputs on the primary receiver
– 5 differential RF inputs on the diversity receiver
• 8 RF outputs on transmitter
• DigRF 3G and 4G interfaces to the baseband IC
• RX and TX auto calibration routines
• Auxiliary SPI to control PAs, switching regulators and
antenna switch
• GPO ports for non-SPI components
• Simplified timing and control via a microcontroller unit core
• Minimized factory calibration time
FUJITSU MICROELECTRONICS AMERICA, INC.
8
Corporate Headquarters
1250 E. Arques Avenue, M/S 333, Sunnyvale, CA 94085-5401
Tel: [phone] Fax: [phone]
E-mail: [e-mail] Web Site: http://us.fujitsu.com/micro
© 2010 Fujitsu Microelectronics America, Inc.
All company and product names are trademarks or
registered trademarks of their respective owners.
Printed in the U.S.A. RFT-FS-21377-05/2010