MB86H01 Datasheet, PDF(2/2 Page) Fujitsu Component Limited. – SD Multi-Standard Decoder for Set-Top-Box and iDTV

ARC Tangent-A4 CPU @ 202.5MHz with 4K-I/2K-D cache

ARM7TDMI-STM * (67.5MHz): for H.264 video decoder

H.264 Main profile / Level 3.0 Decoder, MPEG-2 Video Main profile / Main Level Decoders

Video Encoder PAL/NTSC/SECAM, 5ch Video DAC embedded, Teletext/WSS/PDC/CC/VBID

Digital RGB output, ITU-R 656 video input/output, YCrCb analog SD output

DDR memory interface

Input clock frequency

Operating clock frequency

L/R serial, I2S, S/P-DIF

3 input streams, Built-in DVB descrambler

3DES encryption/decryption

16-bit width DDR-SDRAM135MHz / Supports 128Mbit to 512Mbit SDRAM

USB 2.0 high Speed OTG Controller (ULPI Interface)

1.2V core, 2.5/3.3V I/O

Internal: 135MHz / DDR memory interface: 135MHz

MB86H01AA: 256-pin PBGA, 27sq.mm (1.27-mm pitch)

MB86H01AB: 240-pin FBGA, 10sq.mm (0.5-mm pitch)

FUJITSU MICROELECTRONICS LIMITED

Shinjuku Dai-Ichi Seimei Bldg., 7-1, Nishishinjuku 2-chome, Shinjuku-ku,

Tokyo 163-0722, Japan Tel: +81-3-5322-3347 Fax: +81-3-5322-3387

http://jp.fujitsu.com/fml/en/

* ARM7TDMI-S is a trademark of ARM Limited.

North and South America

FUJITSU MICROELECTRONICS AMERICA, INC.

1250 E. Arques Avenue, M/S 333

Sunnyvale, CA 94085-5401, U.S.A.

Tel: +1-408-737-5600 Fax: +1-408-737-5999

http://www.fma.fujitsu.com/

FUJITSU MICROELECTRONICS ASIA PTE. LTD.

151 Lorong Chuan, #05-08 New Tech Park

Tel : +65-6281-0770 Fax : +65-6281-0220

http://www.fujitsu.com/sg/services/micro/semiconductor/

FUJITSU MICROELECTRONICS EUROPE GmbH

Pittlerstrasse 47, 63225 Langen,

Tel: +49-6103-690-0 Fax: +49-6103-690-122

http://emea.fujitsu.com/microelectronics/

FUJITSU MICROELECTRONICS KOREA LTD.

206 KOSMO TOWER, 1002 Daechi-Dong,

Gangnam-Gu, Seoul 135-280, Republic of Korea

Tel: +82-2-3484-7100 Fax: +82-2-3484-7111

http://kr.fujitsu.com/fmk/

FUJITSU MICROELECTRONICS SHANGHAI CO., LTD.

Rm. 3102, Bund Center, No.222 Yan An Road (E),

Shanghai 200002, China

Tel : +86-21-6146-3688 Fax : +86-21-6335-1605

http://cn.fujitsu.com/fmc/

FUJITSU MICROELECTRONICS PACIFIC ASIA LTD.

10/F., World Commerce Centre, 11 Canton Road

Tsimshatsui, Kowloon, Hong Kong

Tel : +852-2377-0226 Fax : +852-2376-3269

http://cn.fujitsu.com/fmc/en/

The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering.

The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU

MICROELECTRONICS device; FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating

the device based on such information, you must assume any responsibility arising out of such use of the information.

FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic

diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS or any third party or

does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for

any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein.

The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and

household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to

the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control,

medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite).

Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products.

Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such

as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions.

Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or

US export control laws.

The company names and brand names herein are the trademarks or registered trademarks of their respective owners.