|
MB3887 Datasheet, PDF (2/33 Pages) Fujitsu Component Limited. – DC/DC Converter IC for Charging Li-ion battery | |||
|
◁ |
MB3887
(Continued)
⢠Output voltage setting using external resistor
: 1 cell to 4 cells
⢠High efficiency
: 96% (VIN = 19 V, Vo = 16.8 V)
⢠Wide range of operating supply voltages
: 8 V to 25 V
⢠Output voltage setting accuracy
: 4.2 V ± 0.74% (Ta = â10 °C to +85 °C , per cell)
⢠Charging current accuracy
: ±5%
⢠Built-in frequency setting capacitor enables frequency setting using external resistor only
⢠Oscillation frequency range
: 100 kHz to 500 kHz
⢠Built-in current detection amplifier with wide in-phase input voltage range : 0 V to VCC
⢠In standby mode, leave output voltage setting resistor open to prevent inefficient current loss
⢠Built-in standby current function
: 0 µA (standard)
⢠Built-in soft-start function independent of loads
⢠Built-in totem-pole output stage supporting P-channel MOS FET devices
2
|
▷ |