FTR-JR Datasheet, PDF (2/7 Pages) Fujitsu Component Limited. – POWER RELAY 1 POLE 16 A-SLIM POWER RELAY

FTR-JR SERIES
n COIL DATA CHART
MODEL _Nominal
FTR-JR Series ^Voltage
Coil
R^esistance
(± 10%)
Must Operate Must Release
Voltage
Voltage
FTR-JRJ( ) 012W 12 VD C
FTR-JRJ( )018W 18 VD C
FTR-JRJ( )024W 24 VD C
270 W
610 W
1,100 W
9.0 VDC
13.5 VDC
18.0 VDC
0.6 VDC
0.9 VDC
1.2 VDC
Note:All values in the table are measured at 20°C.
Nominal
Po w er
530 mW
530 mW
530 mW
n specifications
Item
Contact
Arrangement
FTR-JR Series
1 Form A (SPST-NO)
Material
Silver alloy
Resistance (initial)
Maximum 100 m ohm (at 1A 6VDC)
T _{Rating (resistive)}
277VAC 16 A
o_{Maximum Carrying Current}
20A
Maximum Switching Rating
4,432VA
be _{Maximum Switching Voltage}
400 VAC
Maximum Switching Current
20A
D _{Maximum Switching Load *1}
is _Coil
Nominal Power (at 20˚ C)
5 VDC, 10 mA
530mW
c _{Operate Power (at 20˚ C)}
300mW
o _{Operating Temperature}
-40° C to +85° C (no frost)
n _{Time Value Operate Time (at nominal voltage) Maximum 15 ms (excluding bounce time)}
ti _{Release Time (at nominal voltage) Maximum 10 ms (excluding bounce time)}
n _Life
ued _Other
Mechanical
Electrical Contact Ratin g
Vibration ^Misoperation
2 x 10⁷ operations minimum
10 x 1 0⁴ operations minimum
10-55 Hz (double amplitude of 1.65mm)
Resistance _Endurance
10-55 Hz (double amplitude of 2.0mm )
Shock
Misoperation
Resistance _Endurance
Weight
200m/s² (11±1ms)
1,000m/ s² (6±1ms)
Approximately 20g
*¹ Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.