MB3793-27A Datasheet, PDF (18/25 Pages) Fujitsu Component Limited. – Power Voltage Monitoring IC with Watchdog Timer

MB3793-27A
■ NOTES ON USE
• Take account of common impedance when designing the earth line on a printed wiring board.
• Take measures against static electricity.
- For semiconductors, use antistatic or conductive containers.
- When storing or carrying a printed circuit board after chip mounting, put it in a conductive bag or container.
- The work table, tools and measuring instruments must be grounded.
- The worker must put on a grounding device containing 250 kΩ to 1 MΩ resistors in series.
• Do not apply a negative voltage
- Applying a negative voltage of −0.3 V or less to an LSI may generate a parasitic transistor, resulting in
malfunction.
■ ORDERING INFORMATION
Part number
MB3793-27APF-❏❏❏
MB3793-27APNF-❏❏❏
MB3793-27APFV-❏❏❏
MB3793-27APF-❏❏❏E1
MB3793-27APNF-❏❏❏E1
MB3793-27APFV-❏❏❏E1
Package
8-pin Plastic SOP
(FPT-8P-M01)
8-pin Plastic SOP
(FPT-8P-M02)
8-pin Plastic SSOP
(FPT-8P-M03)
8-pin Plastic SOP
(FPT-8P-M01)
8-pin Plastic SOP
(FPT-8P-M02)
8-pin Plastic SSOP
(FPT-8P-M03)
Marking
3793-Y
3793-Y
93-Y
3793-Y
3793-Y
93-Y
Remarks
conventional version
conventional version
conventional version
Lead Free version
Lead Free version
Lead Free version
■ RoHS Compliance Information of Lead (Pb) Free version
The LSI products of Fujitsu with “E1” are compliant with RoHS Directive , and has observed the standard of
lead, cadmium, mercury, Hexavalent chromium, polybrominated biphenyls (PBB) , and polybrominated diphenyl
ethers (PBDE) .
The product that conforms to this standard is added “E1” at the end of the part number.
18