MB90520B Datasheet, PDF (12/104 Pages) Fujitsu Component Limited. – 16-bit Microcontroller

MB90520B Series
Pin No.
LQFP-120^*1
QFP-120^*2
56, 58
59 to 62
64 to 71
72,
75 to 81
17 to 24
25 to 32
Pin Name
Circuit
Type
Function
P71, P73
General-purpose I/O ports
Only available when event outputs from 16-bit reload timers 0 and 1 are
disabled.
TOT0,
TOT1
E Output pins for 16-bit reload timers 0 and 1.
Only available when output is enabled for 16-bit reload timers 0 and 1.
OUT5,
OUT7
Event output pins for ch. 5 and ch. 7 of output compare unit 1 (OCU)
Only available when event output from output compare 1 is enabled.
General-purpose I/O ports
P74 to P77
Only available when the LCD controller/driver control register is set to the
COM0 to
COM3
ports.
L
Common pins for the LCD controller/driver
Only available when the LCD controller/driver control register is set to the
common outputs.
General-purpose I/O ports
P80 to P87
Only available when the LCD controller/driver control register is set to the
SEG16 to
SEG23
ports.
L
LCD segment output pins for the LCD controller/driver
Only available when the LCD controller/driver control register is set to the
segment outputs.
P90,
P91 to P97
General-purpose I/O ports (Support up to IOL = 10 mA)
Only available when the LCD controller/driver control register is set to the
ports.
M
SEG24,
LCD segment output pins for the LCD controller/driver
SEG25 to
Only available when the LCD controller/driver control register is set to the
SEG31
segment outputs.
SEG0 to
SEG7
F LCD segment 00 to 07 pins for the LCD controller/driver
General-purpose I/O ports
PA0 to PA7
Only available when the LCD controller/driver control register is set up to
SEG8 to
SEG15
the ports.
L
LCD segment 08 to 15 pins for the LCD controller/driver
Only available when the LCD controller/driver control register is set to the
segment outputs.
*1 : FPT-120P-M24
*2 : FPT-120P-M13
(Continued)
12
DS07-13707-5E