MB3776A Datasheet, PDF (11/16 Pages) Fujitsu Component Limited. – Switching Regulator Controller

MB3776A
s NOTES ON USE
• Take account of common impedance when designing the earth line on a printed wiring board.
• Take measures against static electricity.
- For semiconductors, use antistatic or conductive containers.
- When storing or carrying a printed circuit board after chip mounting, put it in a conductive bag or container.
- The work table, tools and measuring instruments must be grounded.
- The worker must put on a grounding device containing 250 kΩ to 1 MΩ resistors in series.
• Do not apply a negative voltage
- Applying a negative voltage of −0.3 V or less to an LSI may generate a parasitic transistor, resulting in
malfunction.
s ORDERING INFORMATION
Part number
MB3776A-P
MB3776APF
MB3776APNF
MB3776APFV
Package
8-pin Plastic DIP
(DIP-8P-M01)
8-pin Plastic SOP
(FPT-8P-M01)
8-pin Plastic SOP
(FPT-8P-M02)
8-pin Plastic SSOP
(FPT-8P-M03)
Remarks
11