MB3516A Datasheet, PDF (11/13 Pages) Fujitsu Component Limited. – RGB Encoder

MB3516A
s USAGE PRECAUTIONS
1. Analog RGB signal input
The analog RGB signal must be input with 1.0 Vp-p or lower at a sufficiently low impedance.
2. Subcarrier input
The subcarrier input to the MB3516A supports both of a sine wave from 1.0 to 5.0 Vp-p and a pulse.
3. Board pattern design
The noise limiting capacitors to be inserted to the Vcc1 and Vcc2 pins must be connected to the GND1 and
GND2 pins as closely to the pins as possible.
The patterns to be connected to the GND1 and GND2 pins must be as wide as possible to reduce parasitic
impedance.
s ORDERING INFORMATION
Part number
MB3516APF
Package
24-pin plastic SOP
(FPT-24P-M01)
Remarks
11