MB95430 Datasheet, PDF (1/56 Pages) Fujitsu Component Limited. – 8-bit Microcontrollers

FUJITSU SEMICONDUCTOR
DATA SHEET
DS07–12xxx–1E
8-bit Microcontrollers
CMOS
F²MC-8FX MB95430H Series
MB95F432H/F433H/F434H
MB95F432K/F433K/F434K
■ DESCRIPTION
MB95430H is a series of general-purpose, single-chip microcontrollers. In addition to a compact instruction
set, the microcontrollers of this series contain a variety of peripheral resources.
Note: F²MC is the abbreviation of FUJITSU Flexible Microcontroller.
■ FEATURES
• F²MC-8FX CPU core
Instruction set optimized for controllers
• Multiplication and division instructions
• 16-bit arithmetic operations
• Bit test branch instructions
• Bit manipulation instructions, etc.
• Clock
• Selectable main clock source
Main OSC clock (up to 16.25 MHz, maximum machine clock frequency: 8.125 MHz)
External clock (up to 32.5 MHz, maximum machine clock frequency: 16.25 MHz)
Main CR clock (1/8/10/12.5 MHz ±2%, maximum machine clock frequency: 12.5 MHz)
• Selectable subclock source
Sub-OSC clock (32.768 kHz)
External clock (32.768 kHz)
Sub-CR clock (Typ: 100 kHz, Min: 50 kHz, Max: 200 kHz)
• Timer
• 8/16-bit composite timer × 1 channel
• 16-bit PPG × 1 channel
• 16-bit free-running timer × 1 channel
• 16-bit output compare × 2 channels
• Time-base timer × 1 channel
• Watch prescaler × 1 channel
• UART/SIO × 1 channel
• Full duplex double buffer
• Capable of clock-asynchronous (UART) serial data transfer and clock-synchronous (SIO) serial data
transfer
(Continued)
For the information for microcontroller supports, see the following website.
http://edevice.fujitsu.com/micom/en-support/
Copyright©2010 FUJITSU SEMICONDUCTOR LIMITED All rights reserved
2010.8