MB95200 Datasheet, PDF (1/4 Pages) Fujitsu Component Limited. – Low-Pin-Count Microcontrollers

FS fact sheet
Low-Pin-Count Microcontrollers
MB95200, MB95300, and MB95400 Series
MB95310
MB95370
• LCD
• EEPROM*
MB95330
MB95390
• Timers
• Motor Control
• EEPROM*
MB95430
• Ope Amp
• Comparator
• EEPROM*
MB95350
• I²C
• EEPROM*
MB95200
MB95210
MB95220
MB95260
MB95270
MB95280
• EEPROM*
1.8V - 3.6V
2.4V - 5.5V
Fujitsu F²MC-8FX Low-Pin-Count Microcontrollers
Description0
The Fujitsu F²MC-8FX low-pin-count series meets the growing
demand for microcontrollers (MCUs) in small-scale, low-cost ap-
plications such as home appliances, electrical tools, consumer
healthcare products and after-market car accessories.
The MB95200, MB95300 and MB95400 families are general-
purpose, single-chip microcontrollers. In addition to a compact
instruction set, these microcontrollers contain a variety of pe-
ripheral controls capable of enabling BLDC motor control or 120
degree DC inverter motor control applications, an LCD controller,
a voltage comparator and operation amplifier.
Flexible and highly functional, the devices can be used for
system control and sub-micro control. For example, if I/O ports
or A/D converters in the main microcontroller are insufficient
due to system specification changes, the Fujitsu low-pin-count
microcontrollers can support these functions as a sub-microcon-
troller. Or if the standby current of the main microcontroller is
too large, the MCUs can manage the power supply.
The MB95200, MB95300 and MB95400 family devices feature
high-performance, low-voltage, embedded flash; a preci-
sion on-chip RC oscillator; and an on-chip debug feature. The
dual-operation flash memory supports a boot-loader imple-
mentation. The flash memory also supports a cost-effective
emulation of an on-chip EEPROM by simultaneously executing
the program code while writing or erasing data from one of the
flash sectors.
The Fujitsu MB95300 series also contains built-in hardware,
including a multi-pulse generator (MPG), which can be used
for the multi-channel DC motor control, BLDC motor control
and 120 degree DC inverter motor control operation; and an
LCD controller, which can operate 190pix or 128pix size. The
MB95400 series contains a built-in voltage comparator and
operational amplifier.
The Fujitsu low-pin-count MCUs are easy to use and provide
an optimal environment at each stage of the process from
program development to writing to flash memory. The BGM
adapter in-circuit emulator can be used for debugging and
flash programming.