MB90960 Datasheet, PDF (1/51 Pages) Fujitsu Component Limited. – 16-bit Microcontroller

FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-13749-1E
16-bit Microcontroller
CMOS
F²MC-16LX MB90960 Series
MB90F962(S)/V340E-101/V340E-102
■ DESCRIPTION
The MB90960-series is a 16-bit general-purpose microcontroller. Fujitsu now offers on-chip Flash-ROM program
memory up to 64 Kbytes.
The power supply (3 V) is supplied to the internal MCU core from an internal regulator circuit. This creates
a major advantage in terms of EMI and power consumption.
The unit features a 4 channel input capture unit, 1 channel 16-bit free-run timer, 2-channel LIN-UART, and 16-
channel 8/10-bit A/D converter as the peripheral resource.
Note : F²MC is the abbreviation of FUJITSU Flexible Microcontroller.
■ FEATURES
• Clock
• Built-in PLL clock frequency multiplying circuit
• Machine clock (PLL clock) selectable from frequency division by 2 of oscillation clock or 1 to 6-multiplied
oscillation clock (4 MHz to 24 MHz when oscillation clock is 4 MHz) .
• Sub clock operation : Up to 50 kHz (devices without S-suffix only)
• Minimum instruction execution time : 42 ns (4 MHz oscillation clock and 6-multiplied PLL clock) .
(Continued)
Be sure to refer to the “Check Sheet” for the latest cautions on development.
“Check Sheet” is seen at the following support page
URL : http://www.fujitsu.com/global/services/microelectronics/product/micom/support/index.html
“Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system
development.
Copyright©2007 FUJITSU LIMITED All rights reserved