MB90598 Datasheet, PDF (1/47 Pages) Fujitsu Component Limited. – 16-bit Proprietary Microcontroller

FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-13705-3E
16-bit Proprietary Microcontroller
CMOS
F²MC-16LX MB90595/595G Series
MB90598/F598/F598G/V595/V595G
s DESCRIPTION
The MB90595/595G series with FULL-CAN*¹ interface and FLASH ROM is especially designed for automotive
and industrial applications. Its main features are two on board CAN Interfaces, which conform to V2.0 Part A and
Part B, while supporting a very flexible message buffer scheme and so offering more functions than a normal full
CAN approach.
The instruction set of F²MC-16LX CPU core inherits an AT architecture of the F²MC*² family with additional
instruction sets for high-level languages, extended addressing mode, enhanced multiplication/division instructions,
and enhanced bit manipulation instructions. The microcontroller has a 32-bit accumulator for processing long
word data.
The MB90595/595G series has peripheral resources of 8/10-bit A/D converters, UART (SCI), extended I/O serial
interface, 8/16-bit PPG timer, I/O timer (input capture (ICU), output compare (OCU)) and stepping motor controller.
*1: Controller Area Network (CAN) - License of Robert Bosch GmbH
*2: F²MC stands for FUJITSU Flexible Microcontroller.
s FEATURES
• Clock
Embedded PLL clock multiplication circuit
Operating clock (PLL clock) can be selected from divided-by-2 of oscillation or one to four times the oscillation
(at oscillation of 4 MHz, 4 MHz to 16 MHz).
Minimum instruction execution time: 62.5 ns (operation at oscillation of 4 MHz, four times the oscillation clock,
VCC of 5.0 V)
(Continued)
s PACKAGE
100-pin Plastic QFP
(FPT-100P-M06)