MB90595G_08 Datasheet, PDF (1/56 Pages) Fujitsu Component Limited. – 16-bit Proprietary Microcontroller

FUJITSU MICROELECTRONICS
DATA SHEET
DS07-13705-7E
16-bit Proprietary Microcontroller
CMOS
F²MC-16LX MB90595G Series
MB90598G/F598G/V595G
■ DESCRIPTION
The MB90595G series with FULL-CAN interface and FLASH ROM is especially designed for automotive and
industrial applications. Its main features are two on board CAN Interfaces, which conform to V2.0 Part A and Part
B, while supporting a very flexible message buffer scheme and so offering more functions than a normal full CAN
approach.
The instruction set of F²MC-16LX CPU core inherits an AT architecture of the F²MC* family with additional
instruction sets for high-level languages, extended addressing mode, enhanced multiplication/division instruc-
tions, and enhanced bit manipulation instructions. The microcontroller has a 32-bit accumulator for processing
long word data.
The MB90595G series has peripheral resources of 8/10-bit A/D converters, UART (SCI), extended I/O serial
interface, 8/16-bit PPG timer, I/O timer (input capture (ICU), output compare (OCU)) and stepping motor controller.
* : F²MC is the abbreviation of FUJITSU Flexible Microcontroller.
For the information for microcontroller supports, see the following web site.
http://edevice.fujitsu.com/micom/en-support/
Copyright©2002-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved
2008.9