MB506 Datasheet, PDF (1/4 Pages) Fujitsu Component Limited. – ULTRA HIGH FREQUENCY PRESCALER

Sept. 1995
Edition 3.0a
DATA SHEET
MB506
ULTRA HIGH FREQUENCY PRESCALER
ULTRA HIGH FREQUENCY PRESCALER
The Fujitsu MB506 is a high frequency, up to 2.4GHz, prescaler used with a
frequency synthesizer to form a Phase Locked Loop (PLL). It will divide the input
frequency by the modulus of 128 or 256 and the output level is 1.6V peak to peak
on ECL level.Operation in the 1.6GHz range meets the specification for
applications in Direct Broadcasting Satellite Systems (DBS), CATV systems, and
UHF Transceivers.
FEATURES
S High Frequency Operation
2.4GHz max.
PLASTIC PACKAGE
DIP-08P-M01
S Power Dissipation
90mW typ.
S Wide Operation Temperature -40°C to +85°C
S Stable Output Amplitude
V_OUT = 1.6V_p–p
S Complete PLL synthesizer circuit with the Fujitsu MB87006A, PLL
synthesizer IC
S Plastic 8-pin Standard Dual-In-Line Package or Flat Package
PLASTIC PACKAGE
FPT-08P-M01
PIN ASSIGNMENT
ABSOLUTE MAXIMUM RATINGS (See Note)
Rating
Symbol
Value
Unit
Supply Voltage
V_CC
–0.5 to +7.0
V
Input Voltage
V_IN
–0.5 to V_CC
V
Output Current
I_O
10
mA
Storage Temperature
T_STG
–55 to +125
°C
Note: Permanentdevice damage may occur if the aboveAbsolute Maximum Ratings are
exceeded. Functional operation should be restricted to the conditions as detailed in
Copyright E 1995 by FUJITSU LIMITED and FUJITSU MICROELECTRONICS
IN
V_CC
SW
OUT
1
8
2
7
TOP VIEW
3
6
4
5
IN
NC
SW2
GND
This device contains circuitry to protect the inputs against
damage due to high static voltages or electric fields. However,
it is advised that normal precautions be taken to avoid
application of any voltage higher than maximum rated voltages
to this high impedance circuit.