MB4204 Datasheet, PDF (1/8 Pages) Fujitsu Component Limited. – QUAD COMPARATOR

FUJITSU SEMICONDUCTOR
DATA SHEET
LINEAR IC
DS04-12104-2E
QUAD COMPARATOR
MB4204
LOW POWER QUAD COMPARATOR
The Fujitsu MB4204 is a Quad Comparator which consists of four independent channels. The MB4204 is designed
to operate form either a single power or dual power supplies over a wide range of voltages. The input characteristics
is equivalent of current industry standard comparator. Even though operated from a single power supply, the MB4204
is suitably designed to compare multiple signals in parallel and to be operated with battery because its input common
mode voltage range includes ground potential and it requires low power supply current.
The MB4204 can be high density mounted because it integrates 4 circuits on a chip in DIP/FPT-14-pin package.
The MB4204 is pin compatible with LM339.
s FEATURES
• Wide power supply voltage range: +2 to +36V
• Wide input common mode range: 0 to (VCC – 1.5) V
• Low power supply current: 0.8 mA typ.
• Low input offset voltage: 2 mV typ.
• Low input bias current: 25 nA typ.
• Open Collectors Output allow to wired-OR Connection
• Package
—14-pin Plastic DIP Package (Suffix: –P)
—14-pin Plastic FPT Package (Suffix: –PF)
s PACKAGES
PLASTIC PACKAGE
DIP-14P-M02
PLASTIC PACKAGE
FPT-14P-M04
This device contains cirduitry to protect the inputs against damage due to high static voltages or electric fields. However, it is advised that
normal precautions be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit.
1