MB3615 Datasheet, PDF (1/7 Pages) Fujitsu Component Limited. – QUAD OPERATIONAL AMPLIFIER

FUJITSU SEMICONDUCTOR
DATA SHEET
DS04-11108-3E
ASSP
QUAD OPERATIONAL
AMPLIFIER
MB3615
QUAD OPERATIONAL AMPLIFIER
OPERATES FROM A SINGLE OR DUAL POWER SUPPLY
The Fujitsu MB3615 is a Quad operational amplifier having a phase compensatory circuit
and operates from a single power supply or dual power supplies.
The device has equivalent electrical characteristics of current industrial standard opera-
tional amplifier and requires low power supply current.
MB3615 can be mounted in high density because it integrates 4 circuits on a chip in 14-
pin package. It is taking the countermeasure for cross-over distortion, so can be used for
amplifying AC.
The MB3615 is pin compatible with Motorola MC3303.
• No phase compensation required
• Wide power supply voltage
— Single power supply: +3 to +30 V
— Dual power supplies: ±1.5 to ±15 V
• Wide input common mode range: 0 to (VCC -1.5) V
• Low power supply current: 2 mA typ.
• Low Cross-over distortion
ABSOLUTE MAXIMUM RATINGS (see NOTE)
Rating
Power Supply Voltage *
Differential Input Voltage *
Input Common Mode Voltage *
Power Dissipation
Operating Temperature
Storage Temperature
NOTE: * Single Power Supply.
Symbol
VCC
VID
VI
PD
TOP
TSTG
Ta=25°C
Value
Unit
36
V
36
V
-0.3 to +36
V
570
mW
-20 to +75
°C
-55 to +125
°C
Permanent device damage may occur if the above Absolute Maximum Rat-
ings are exceeded. Functional operation should be restricted to the conditions
as detailed in the operational sections of this data sheet. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
PLASTIC PACKAGE
DIP-14P-M02
PLASTIC PACKAGE
FPT-14P-M04
PIN ASSIGNMENT
(TOP VIEW)
OUT-A 1
-IN-A 2
_A _{+ +D_}
14 OUT-D
13 -IN-D
+IN-A ³
12 +IN-D
VCC ⁴
11 GND
+IN-B 5
10 +IN-C
- IN-B 6
OUT-B ⁷
_ _{+ +_}
BC
9 -IN-C
8 _OUT-C
This device contains circuitry to protect the inputs against
damage due to high static voltages or electric fields. However,
it is advised that normal precautions be taken to avoid appli-
cation of any voltage higher than maximum rated voltages to
this high impedance circuit.
1