FTR-P2_08 Datasheet, PDF (1/9 Pages) Fujitsu Component Limited. – SILENT TWIN RELAY FOR AUTOMOTIVE APPLICATIONS 1POLE X 2, H-BRIDGE, 25A

SILENT TWIN RELAY FOR AUTOMO-
TIVE APPLICATIONS
1POLE X 2, H-BRIDGE, 25A
FTR-P2 SERIES
RoHS compliant
n FEATURES
lLow operating sound
An original silent mechanism decreases the propagation of operating
sound when mounted on a PCB. (Average sound pressure: 50dB at 5
cm).
l Compact, high density package
350 mm² mounting area. (11% less than theFBR 510 series non-
quiet twin relay).
l High sensitivity,low power consumption
(nominal power consumption: 450 mW).
l High capacity
Heat dissipation is high due to a single cover structure.
l Ease of PCB layout
The FTR-P2 incorporates internal H-Bridge connections typically used
in reversing applications. All terminals are on the perimeter.
l High breaking capability.
In addition to the standard gap product (0.3 mm), a higher gap prod-
uct (0.6 mm), suitable for over voltage breaking can be supplied.
l Typical applications
Power window, Doorlock, Power seat, Wiper (for H-Bridge circuit)
l RoHS compliant since date code: 0623
Please see page 7 for more information
n ORDERING INFORMATION
FTR-P2 C N 012 W1 **
[Example]
(a) (b) (c) (d) (e) (f )
(a) SeriesName
FTR-P2 : FTR-P2 Series
(b) Contact Arrangement C
: 1 FormC x 2
(c) Contact Gap
N
:0.3 mm gap
(d) Nominal Voltage
009: 9 VDC
010: 10 VDC
012: 12 VDC
(e) Contact Material
W1
: Silver-Tin-Oxide-Indium Oxide
(f) Special product
specification
Symbol to specify special specification product
Note: The part number is stamped on the relay cover as in the following example:
(Example)
Ordering part number: FTR-P2CN012W1
Stamped part number: P2CN012W1
1