FTR-K3-WG_10 Datasheet, PDF (1/6 Pages) Fujitsu Component Limited. – POWER RELAY 1 POLE - 25A - 1.5mm contact gap

FTR-K1 SERIES
POWER RELAY
1 POLE - 25A - 1.5mm contact gap
FTR-K3-WG Series
n FEATURES
l 1 pole, 25A
l 1 Form A
l Contact gap 1.5mm
2.5kV surge breakdown voltage
Compliance with European photovoltaic standard (VDE0126)
l High insulation in small package
(between coil and contact)
- Insulation distance: Clearance > 6.4mm

Creepage > 9.5mm
- Dielectric strength: 5,000VAC
- Surge strength: 8,500V
l Low coil holding voltage contributes to energy saving of
equipment. The coil holding voltage can be reduced to 35%
of nominal coil voltage.
Power consumption at the coil holding voltage:125mW equivalent.
Coil holding voltage is the coil voltage after 100ms of applied
nominal coil voltage.
l Flammability UL94V-0 (plastics)
l Sealing: Flux free, cat II
l RoHS compliant
Please see page 5 for more information
Contains no lead and features cadmium-free contacts
n PARTNUMBER INFORMATION
FTR-K3 A B 012 W - WG
[Example]
(a) (b) (c) (d) (e) (f)
(a) Relay type
FTR-K3: FTR-K3 Series
(b) Contact configuration
A
: 1 form A
(c) Coil type
B
: Standard type (0.78W)
(d) Coil rated voltage
012 : 5....48VDC

Coil rating table at page 3
(e) Contact material
(f) Version
W
: Silver tin oxide ( AgSnO₂ )
WG : Contact gap 1.5mm
Actual marking does not carry the type name : "FTR"
E.g.: Ordering code: FTR-K3AB012W-WG Actual marking: K3AB012W

WG marked on the relay
1