FTR-C1 Datasheet, PDF (1/9 Pages) Fuji Electric – ULTRA MINIATURE RELAY SIGNAL RELAY

FTR-K1 SERIES
POWER RELAY
2 POLES-2A High Insulation/wide Gap
FTR-C1 Series
n FEATURES
l 2 Poles, 2 form C
l Contact gap: more than 0.6mm
l High surge voltage: 2500V between open contacts
5000V between coil & contact
Complies with Telcordia (former Bellcore) 2nd level surge
l Dielectric strength: 1500VAC between open contacts
3000VAC between coil and contact
l Dimensions of large contact gap relay
Height:
9.3mm maximum (THT)
9.65mm maximum (SMT)
Length:
15mm maximum
Width:
7.5mm maximum
l Conforms to IEC60950/ EN60950/UL1950/CSA C 22.2
No. 950 working voltage 250V (supplementary)
l High insulation:
Clearance: min 2.0mm (coil and contacts)
Creepage: min 2.5mm (coil and contacts)
l High reliability-Bifurcated contacts
l Low power consumption 280mW (latching type 140mW)
l RoHS compliant
n PARTNUMBER INFORMATION
FTR-C1CA012 G - B05
[Example](a)(b)(c)(d)(e)(f)

(a) Relay type
FTR-C1: FTR-C1 Series
(b) Contact Configuration
(c) Coil Type / Enclosure
(d) Coil rated Voltage
(e) Contact Material
C
: Through hole type
G
: Surface mount type
S
: Surface mount type-reduced mounting area
A
: Standard type
B
: Single coil latching type
012 : 3.....24 VDC
Coil table at page 3
G
: Gold plated silver palladium
(f) Tape / reel ordering
Nil : standard packaging (tube)
B05 : tape / reel package, only available for SMT type
Actual marking does not carry the type name : "FTR"
E.g.: Ordering code: FTR-C1CA012G
Actual marking: C1CA012G