FCU-010M002 Datasheet, PDF (1/24 Pages) Fujitsu Component Limited. – x-mGC, Electrical Transceiver for 10GBASE-CX4

x-mGC, Electrical Transceiver
for 10GBASE-CX4
x-mGC
Part Number: FCU-010M002
Features
Compliant with IEEE802.3ak (10GBASE-CX4)
XENPAK MSA Rev 3.0 type Compatible module
Industry standard electrical connector, microGiGaCN^TM (I/O interface)
XAUI Four channel electrical interface (Host side card edge)
XAUI Standard 70 pin connector for host connection
Front panel hot swap ability.
XENPAK MSA Rev 3.0 compliant MDIO
Link Alarm Status Interrupt (LASI) support
Total Power consumption under 3.0 watt
20 meters over standard InfiniBand copper cable (24AWG)
With media detect converter (o-mGC), up to 100 meters over standard multi mode fiber.
No external clocks requirement – oscillator on board
Description
The x-mGC is a 10Gigabit Ethernet CX4 Module that designed to ease XENPAK MSA 3.0 and it is an
electrical module that incorporates the complete physical layer functionality from XAUI compliant 4 lanes x
3.125 Gb/s four differential electrical interface to the microGiGaCN™ CX4 compliant electrical interface.
The x-mGC is plugged into a XENPAK hosting system and connects to a 4X InfiniBand cable. The control
interface (MDIO)is also integrated. The x-mGC module includes 10Gb/s Ethernet transmitter and receiver
ports. The host may control the x-mGC registers using XAUI interface as defined in the XENPAK MSA. The
MUX/DEMUX, XAUI interface and MDIO management functions are all integrated into the module, as is a
precision oscillator that removes any need for an external reference clock.
Fujitsu Component Limited
Page 1 of 24