FCN-260D Datasheet, PDF (1/16 Pages) Fujitsu Component Limited. – Differential CONNECTOR

Differential CONNECTOR
FCN-260(D) Series _{R oHS Compliant}
microGiGaCN^TM Stacking Connector
n Features
• High speed matched impedance (100Ω) differential
signal connector
• Low cross talk
• 2-step sequential mating of contacts
• Self alignment feature
• Hot plugable
• RoHS compliant
n Specifications
Item
Operating temperature
range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric withstanding
voltage
Durability
Insertion force
Withdrawl force
n Materials
Sp ec i f i c at i o n s
-55˚ C to +105˚ C
AC 0.1A (signal)
AC 0.5A (ground)
AC 30 V
80m ohms max. (signal)
40m ohms max.(ground)
1000Mohms minimum
AC 500V for 1 minute
100 cycles
50 N maximum (24 pair)
5 N minimum (24 pair)
Item
Mat er i al s
Insulator
Conductor
Plating
LCP Resin (UL94V-0)
Copper Allo y
Contact: Au Plating (PAGOS)
Au over Pd-Ni plating
Fujitsu's FCN-260(D)
Differential Signal Connector
As network speeds increase, designers
are moving to differential interconnects
for network switches and hubs, as well
as for connections between components
in high-speed computer clusters,
video systems, test equipment, and
real-time medical equipment (MRI,
etc.). Conventional connectors do not
support the speed and signal integrity
requirements of these applications. By
implementing a connector specifically
for high-speed, high-density, board-to-
board differential applications, designers
can take advantage of a differential
interconnect instead of more costly fiber
optic or coax alternatives.
Differential signals use two conductors
to carry signals that are compliments of
one another. This arrangement reduces
noise effects because any noise
introduced by interference or crosstalk
appears in both signals (common-mode
noise) and is ignored by differential
Specifications
subject to change
Dimensions are in millimeters (inches)
http://us.fujitsu.com/components