FBR46 Datasheet, PDF (1/7 Pages) Fujitsu Component Limited. – MINIATURE RELAY 2 POLES-1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES

FUJITSU TAKAMISAWA
COMPONENT CATALOG
MINIATURE RELAY
2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)
FBR46 SERIES
s FEATURES
q Miniature size
About 50% smaller in volume compared with the FBR240
series used mainly in communication equipment.
q High surge voltage
2,500 V minimum of surge strength (Bellcore standard),
and 1,500 VAC minimum of dielectric strength between coil
and contact (-15, -16 type).
q Low power consumption
85 mW of operate power (150 mW of nominal power con-
sumption) by built-in permanent magnet.
q Shipping tube package
s ORDERING INFORMATION
[Example]
FBR46 N D 012 -P -15 -CSA
(a) (b) (*) (c) (d) (e) (f )
(a) Series Name
FBR46 : FBR46 Series
(b) Enclosure
N
: Plastic sealed
(*) Coil Type
D
: Standard, -15, -16 (DC coil)
G : 65% Operate type
L1 : Single winding latching type
L2 : Double winding latching type (refer to the SPECIFICATIONS)
(c) Nominal Voltage
(Example) Standard, -15, -16 type
(Example) Latching type
005: 5 VDC
05: 5 VDC
012: 12 VDC
12: 12 VDC
(refer to the COIL DATA CHART)
(d) Contact Material
–P : Gold-overlay silver-palladium
(e) Dielectric Strength
Nil : Between coil and contacts 1,000 VAC, between contacts 750 VAC
-15 : Between coil and contacts 1,500 VAC, between contacts 750 VAC
-16 : Between coil and contacts 1,500 VAC, between contacts 1,000 VAC
(f) Safety Specification
Nil : Standard (UL114 recognized)
-CSA : UL114 + CSA recognized
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR46ND012-P
Stamp: 46ND012-P
1