FBR244 Datasheet, PDF (1/5 Pages) Fujitsu Component Limited. – MINIATURE RELAY 2 POLES-1 to 2 A (FOR SIGNAL SWITCHING)

FUJITSU TAKAMISAWA
COMPONENT CATALOG
MINIATURE RELAY
2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)
FBR244 SERIES
s FEATURES
q Gold-overlay bifurcated contact
Contact material and shape especially suitable for signal
switching; assures reliability at low level switching.
q Conforms to FCC68 standards
High voltage relays are also available with dielectric
strength greater than 1,000 VAC and surge strength
greater than 1,500 V.
N q Formed terminals for temporary mounting
Kink terminals enable FBR240 Series relays to be mounted
O _{temporarily on a PC board.}
q Automatic mounting
T _{Shipped in carrier case plastic magazine suitable for auto-}
matic mounting.
F _{q UL and CSA recognized}
O _{s ORDERING INFORMATION}
D _{R [Example]}
FBR244 N D 012 / 02C S -2 -CSA
(a) (b) (c) (d) (e) (f ) (g) (h)
ES _{N (a) Series Name}
I ^{E (b) Enclosure}
G _{W (c) Coil Type}
NS _{(d) Nominal Voltage}
FBR244: FBR244 Series
Nil : Flux free type
N : Plastic sealed type
D : Standard (nominal power 0.5 W type)
G : G type (nominal power 0.55 W type)
(Example) Standard
003: 3 VDC
(Example) G type
005: 4.5 VDC
012: 12 VDC
009: 9 VDC
(refer to the COIL DATA CHART)
(e) Contact Arrangement
02C : 2 form C (DPDT)
(f) Contact Style and Contact Material T : Bifurcated, gold-overlay silver contact
E : Bifurcated, gold-overlay silver-palladium contact
S : Single, gold-overlay silver contact
P : Single, gold-overlay silver-palladium contact
(g) Special Type
Nil : Standard
-2 : High dielectric strength type
(h) Safety Specification
Nil : Standard
-UL : UL114 recognized
-CSA : UL114 + CSA recognized
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR244D012/02CE
Stamp: 244D012/02CE
1