FBR211 Datasheet, PDF (1/5 Pages) Fujitsu Component Limited. – 1 POLE-1 to 2 A (FOR SIGNAL SWITCHING)

MINIATURE RELAY
1 POLE—1 to 2 A (FOR SIGNAL SWITCHING)
FBR211 SERIES
s FEATURES
q 2 A maximum carrying current
Capable of 2 A maximum continuous carrying current in the
contact
q Superior reliability gold-overlay contacts
P type: Gold-overlay silver-palladium contacts
q International terminal pitch of one inch grid terminal layout
q High sensitivity, low power dissipation types also available
Standard types: 0.45 W (A or B type)
High sensitivity types: 0.2 W (C or E type)
q Conforms to FCC 68.302 (high dielectric strength type)
q UL recognized (File number E63615)
q CSA recognized (File number LR64026)
s ORDERING INFORMATION
[Example]
FBR211 S A D012 U – P 2 (–CSA)
(a) (b) (c) (d) (e) (f ) (g) (h)
(a) Series Name
FBR211
(b) Enclosure
S: Flux free type
N: Plastic sealed type
(c) Coil Power and Schematics
} ^{A: Standard A type}
B: Standard B type
(nominal power 0.45 W type)
} ^{C: High sensitivity C type}
E: High sensitivity E type
(nominal power 0.2 W type)
(d) Nominal Voltage
(Example) D003: 3 VDC
D012: 12 VDC (refer to the COIL DATA CHART)
(e) UL Standard
Nil : Standard
U : UL114 recognized
(f ) Contact Material
P : Gold-overlay silver-palladium
M : Gold-overlay silver
(g) Special Type
Nil : Standard
2 : High dielectric strength type
(h) CSA Standard
Nil : Standard
-CSA : UL114 + CSA recognized (e) is U
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR211SAD005-P
Stamp: 211SAD005-P
1