FBR12 Datasheet, PDF (1/6 Pages) Fujitsu Component Limited. – 2 POLES-1 to 2 A (FOR SIGNAL SWITCHING)

MINIATURE RELAY
2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)
FBR12 SERIES
s FEATURES
q Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIP
Up to 50% less volume and board area than previous
generation telecom relay.
q Slim type for high density mounting
q Conforms to Bellcore TR-NWT-001089 and FCC Part 68
requirements
N _{q UL recognized and CSA certified}
O q Low power consumption
q Conforms to IEC 950 (W type only)
T _{– 2.5 mm clearance and creepage between coil and contacts}
–5000 V surge strength between coil and contacts (2x10µs
F _{surge wave)}
O _{–2000 Vrms dielectric strength between coil and contacts}
F ^{D R –UL 1950 and IEC950 (approval in process)}
B _{E N s ORDERING INFORMATION}
B ^{R1 SI E [Example]}
FBR12 N D 12 –P
(a) (b) (c) (d) (e)
–** (–CSA)
(f ) (g)
2 ^{G W} _{(a) Series Name}
FBR12 : FBR12 Series
E _{D S} N _{(b) Enclosure & Coil Power}
N
: Standard (plastic sealed type)
W
: High dielectric strength type (plastic sealed type)
H
: High sensitivity type
E _{(c) Coil Type}
D
: DC coil
IS _{R (d) Nominal Voltage}
Refer to the COIL DATA CHART
C ^IE _{(e) Contact Material}
Nil
: Gold-overlay silver-nickel
–P : Gold-overlay silver-palladium
O _{S (f) Custom Designation}
To be assigned custom specification
N _{T (g) CSA Standard}
–CSA : UL114 + CSA recognized
–CSA : UL1950 + CSA (under application)
T _{O Note: The designation name is stamped on the top of the relay case as follows:}
I ^{(Example) Designation ordered: FBR12ND05}
N Stamp: 12ND05
I _{s SAFETY STANDARD AND FILE NUMBERS}
E _{UL508, 1950, 114 (File No. E63615)}
D _{C22.2 No. 0, No. 14 (File No. LR40304 or LR64026)}
Nominal coil voltage
Contact rating
3 to 24 VDC
0.5 A 125 VDC resistive
2 A 30 VDC resistive
0.3 A 110 VAC resistive
1