X3DM-050KPDSR Datasheet, PDF (2/2 Pages) Fujikura Ltd. – Pre-amplified/3V Excitation/Differential

Pre-amplified/3V Excitation/Differential
Outline dimensions
X3DM
Labelled faceplate
8
3.5
654
Projections
0.15
0.5
R0.5
X3DM Data sheet
Unit : mm
456
Pressure port 2
Pressure port 1
123
1
2.54
2.54
0.8
10 _Max.
321
1
Recommended footprint for PCB
2- 1.2(Holes for projections)
2 _{Index direction}
3.4
Index
Connection diagram
1
Zooming up the projections
Land-pads
11
16.6
(Unit : mm)
X3DM
C1
Vcc
Vout
GND
C2
GND
Vcc(DC3V)
Vout
Remarks :
1) C1 : Connect 680pF capacitor within 2cm distance from
leads.
2) C2 : Connect 0.01 F or more capacitor within 2cm
distance from leads.
3) 4 and 5 pins must be No Connection. Open them as float-
ing ones completely, and do NOT connect to other line or
each other.
Transfer Function
Vout=Vs (P + ) (Pressure Error Temperature Error Multiplier
Vs)
Vs=3.0volts Notes ; The output voltage (Vout) is no perfect ratiometric with the power supply voltage.
P=Input Pressure(kPa)
Temperature Error Multiplier=1
Model
050KPG(D)
100KPG(D)
100KPGV
100KPGW(DW)
200KPG(D)
001MPGW(D)
115KPA
pressure range
0 50kPa
0 100kPa
0 100kPa
0 +100kPa
0 200kPa
0 +1MPa
15 115kPa.abs
0.01
0.005
0.005
0.0025
0.0025
0.0025
0.005
Note ; Please read instruction “Notes” before using the sensor.
Fujikura reserves the right to change specifications without notice.
0.1667
0.1667
0.1667
0.4667
0.1667
0.1667
0.09167
Pressure Error(kPa)
2.5
5.0
5.0
10.0
10.0
50.0
5.0
If you have any questions regarding technical issues or specifications, please contact us.
Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan
Phone [phone] Fax. [phone]
E-mail : [e-mail]
2