E413511 Datasheet, PDF (8/18 Pages) Fuji Electric – D/A Converter for Digital Tuning

MB88346L
s ABSOLUTE MAXIMUM RATINGS
Prameter
Power supply voltage
Input voltage
Output voltage
Power consumption
Operating temperature
Storage temperature
Symbol
Condition
VCC
VDD*
VIN
VOUT
PD
Ta
Tstg
GND used as reference,
Ta = 25°C
—
—
—
Rating
Unit
Min.
Max.
–0.3
+7.0
V
–0.3
+7.0
V
–0.3
VCC + 0.3
V
–0.3
VCC + 0.3
V
—
250
mW
–20
+85
°C
–55
+150
°C
* : VCC ≥VDD
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Prameter
Symbol
Condition
Min.
Value
Typ.
Unit
Max.
Power supply voltage 1
VCC
—
GND
—
2.7
—
3.6
V
—
0
—
V
Power supply voltage 2
VDD
VDD – VSS ≥ 2.0 V
VSS
2.0
GND
—
VCC
V
—
VCC – 2.0 V
Analog output source current
IAL VCC = 3.0 V
—
—
1.0
mA
Analog output sink current
Oscillator limiting output capacity
IAH VCC = 3.0 V
CAL
—
—
—
1.0
mA
—
—
0.1
µF
Digital data value range
—
—
#00
—
#FF
—
Operating temperature
Ta
—
–20
—
+85
°C
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
8