EDS6-85E Datasheet, PDF (3/8 Pages) Fuji Electric – FCX – A SERIES DIFFERENTIAL PRESSURE TRANSMITTER

Performance specifications
Accuracy rating: (including linearity, hysteresis, and re-
peatability)
For spans greater than 1/10 of URL: ± 0.1% of span
For spans below 1/10 of URL (Model FKC only):
( ) ^±
0.05+0.05 ^{0.1 × URL} % of span
Span
Option 0.075%
Linearity:
0.05% of calibrated span
Stability:
± 0.1% of upper range limit (URL) for 24
months
Temperature effect:
Effects per 55°C change between the lim-
its of – 40°C and +85°C
Range code
(6th digit in Code ^{Zero shift}
symbols)
Total effect
“1”/1kPa
{10mbar}
max. span
“2”/6kPa
{60mbar}
max. span
( ) ( ) ^±
0.25+0.2 ^URL
Span
%/55°C
±
0.3+0.2 ^URL
Span
%/55°C
“3”/32kPa
{320mbar} max.
span
“4”/64kPa
{640mbar} max.
span
“5”/130kPa
( ) ^{{1300mbar} max.}
span
±
0.2+0.05 ^URL
Span
%/55°C
“6”/500kPa
{5000mbar} max.
span
“7”/ 2000kPa
{20000mbar} max.
span
“8”/3000 kPa
{30000mbar} max.
span
( ) ± 0.25+0.05 URL %/55°C
Span
Double the effects for material code (7th
digit in Code symbols) “H”, “M”, “T”,
“B”, “L” and “U”.
Static pressure effect:
Static pressure code
(5th digit in Code symbols)
“1” /1kPa {10m bar} sensor
“2” /6kPa {60 m bar} sensor
“2”
“3”
“4”
Zero shift
Span shift
(% of URL) (% of calibrated span)
±0.2% / 1MPa{10bar} –0.2% /3.2MPa{32bar}
±0.2% / 3.2MPa{32bar} –0.2% /3.2MPa{32bar}
±0.1%/10MPa{100bar} –0.2%/10MPa{100bar}
Double the Zero shift for material code
(7th digit in Code symbols) “H”, “M”,
“T”, “B”, “L” and “U”.
Overrange effect:
Static pressure code
(5th digit in Code symbols)
“1” / 1kPa {10m bar} sensor
“2” / 6kPa {60m bar} sensor
“2”
“3”
“4”
Zero shift (% of URL)
± 0.3% / 1MPa {10bar }
± 0.3% / 3.2MPa {32bar }
± 0.3% /10MPa {100bar }
± 0.3% /16MPa {160bar }
± 0.5% /42MPa {420 bar}
Double the effects for material code (7th
digit in Code symbols)“H”, “M”, “T”,
“B”, “L” and “U”.
Supply voltage effect:
Less than 0.05% of calibrated span per 10V
RFI effect:
Less than 0.2% of URL for the frequen-
cies of 20 to 1000MHz and field strength
30 V/m when electronics covers on.
(Classification: 2-abc: 0.2% span per
SAMA PMC 33.1)
Step response: (without electrical damping)
Range code
“1”
“2”
“3”
“4” through “8”
Time constant
0.8 s
0.5 s
0.3 s
0.2 s
Dead time
approx. 0.3 s
Mounting position effect:
Zero shift, less than 0.12kPa {1.2m bar} for
a 10° tilt in any plane.
No effect on span.
This error can be corrected by adjusting Zero.
(Double the effect for fluorinated fill sensors)
Dielectric strength:
500V AC, 50/60Hz 1 min., between circuit
and earth.
Insulation resistance:
More than 100MΩ at 500V DC.
Turn-on time: 4 sec.
Internal resistance for external field indicator: 12Ω or less.
Performance specifications for square root output:
(Model FKC only)
Accuracy rating:
Span
Output
over 0.1 × URL
below 0.1 × URL
50 to 100%
± 0.1%
± (0.05+0.05 × 0.1 × URL/Span)%
20 to 50%
± 0.25%
± 2.5 × (0.05+0.05 × 0.1 × URL/Span)%
10 to 20%
± 0.5%
± 5 × (0.05+0.05 × 0.1 × URL/Span)%
Temperature effect:
effect per 55°C change between the lim-
its of – 40°C and +85°C
Range code
“1” and “2”
“3” through “8”
Shift at 20% output point
( ) ^URL
± 0.6+0.5 _Span %/55°C
( ) ^URL
± 0.5+0.125 _Span %/55°C
Low flow cut-off: Customer configurable for any point be-
tween 7 to 20% of output
Physical specifications
Electrical connections:
G1/2, 1/2-14 NPT, Pg13.5, or M20 × 1.5
conduit, as specified.
Process connections:
1/4-18 NPT or Rc1/4 on 54mm centers, as
specified.
Meets DIN 19213.
3