EDSX11-135B Datasheet, PDF (1/12 Pages) Fuji Electric – FC SERIES MANUAL LOADER(CONTINUOUS OUTPUT TYPE)

DATA SHEET
FC SERIES MANUAL LOADER
(CONTINUOUS OUTPUT TYPE)
The FC series Manual Loader carries out remote control in
combination with a controller.
This product is a manual loader to be used in a process and
it excels in the effect of monitoring due to adoption of a
color LCD.
Besides standard signals of 1 to 5 V DC, input signals from
thermocouples and resistance bulbs can be handled at op-
tion.
FEATURES
1. High visibility ensured with color graphic display
A color LCD is adopted for graphic display of bar graph
and trend screens,etc.
2. Communication function (option)
RS-485 (Modbus^ protocol) are available.
3. Back-up (option)
If the loader becomes faulty, influence over the system
can be evaded by changing the built-in backup operation
unit.
4. Memory card (option)
Memory card can save any data, for example process in-
put, manipulation output, WAFER output, etc.
PDB3
Signal name/terminal No.
Process variable input/PV1
(Analog input)
External AMV input/PV2
(Analog input)
Forced opening command
(EXS)/Di9
Manual mode command
(SMV)/Di10
Communication
RS-485 (Modbus® )
Transmission terminal
PV indicator
MV indicator
Linearize square root
Filter
(KPV)
MH
ML
Forced opening constants
MV
M
MV
HMV
(Option)
KPV
Alarm
Fault
Signal name/terminal name
Manual mode output/DO8
PV compensation signal
(KPV)/AO3
Manipulation output (voltage)
(MV)/AO1
Manipulation output (current)
/Mi+1, Mi-1
Upper alarm output (H)/DO9
Lower alarm output (L)/DO10
Fault output (FLT-Do)/FLT
FLT lamp
EDSX11-135b
Date Dec. 24, 2003