EDS9-25A Datasheet, PDF (1/2 Pages) Fuji Electric – FC SERIES PT TYPE DISTRIBUTOR (24mm width)

FC SERIES PT TYPE DISTRIBUTOR (24mm width)
DATA SHEET
PTM
The FC series PT type distributor converts a current signal
(4 to 20mA DC) from transmitter into a voltage signal (1 to
5V DC) and distributes the voltage signal to each receiver.
In addition, this distributor is provided with built-in trans-
mitter power suppy.
Its structure is plug-in style.
SPECIFICATIONS
INPUT SPECIFICATION
Input signal:
1 point
Input type
Input signal
Input resistance
Current
4 to 20mA DC
250Ω
OUTPUT SPECIFICATION
Output signal: 1 point
Output type
Voltage
Output signal 1 to 5V DC
Allowable load 500kΩ or over
resistance
(reception, non-insulation)
15kΩ or over
(with output buffer)
POWER SUPPLY
Power supply: 24V DC (20 to 30V DC)
24V AC, +13%, –10%, (47 to 63Hz)
as specified.
Power consumption:
Approx. 2W
OPERATION CONDITION
Ambient temperature:
0 to 50°C
Ambient humidity:Less than 90%RH (no condensation)
Outline dimension (HxWxD):
96 x 26 x 130mm
Mass:
Appox. 200g
Housing:
Plastic housing (color: black)
Mounting method:
Panel mounting or DIN rail mounting
CHARACTERISTICS
Accuracy:
Less than ± 0.1% of full span
Response time: Less than 0.1 sec. (90% response)
Dielectric strength:
1500V AC, 1 min.
Reception only:
Input • Output - Ground
Non-insulation type:
Input • Output • Power- Ground
Non-insulation with buffer: Input • Output • Power- Ground
Power insulation with buffer:
Input • Output - Power- Ground
Power I/O insulation with buffer:
Input - Output - Power- Ground
Insulation resistance:
500V DC, 100MΩ or over
Reception specified:
Input • Output - Ground
Non-insulation type:
Input • Output • Power- Ground
Non-insulation with buffer: Input • Output • Power- Ground
Power insulation with buffer:
Input • Output - Power- Ground
Power I/O insulation with buffer:
Input - Output - Power- Ground
Ambient temperature effect:
Less than ± 0.15% of full span / 10°C
Power regulation effect:
Less than ± 0.1% of full span
CODE SYMBOLS
1 2345678
PTM2 V 1
2
V
A0
B1
C1
D1
E1
Description
Input signal
4 to 20mA DC
Output signal
1 to 5V DC
Output system
Reception only
Non-insulation type
Non-insulation with buffer
Power insulation with buffer
Power I/O insulation with
buffer
Power supply
None
24V DC
24V DC
24V DC/
24V AC (50/60Hz)
24V DC/
24V AC (50/60Hz)
EDS9-25a
Date Feb. 20, 1996