EDS9-23A Datasheet, PDF (1/2 Pages) Fuji Electric – FC SERIES PT TYPE ISOLATER

DATA SHEET
FC SERIES PT TYPE ISOLATER
The FC series PT type isolator converts an input signal
(1 to 5V DC or 4 to 20mA DC) into an isolated output signal.
Its structure is plug-in style.
PTF
SPECIFICATIONS
INPUT SPECIFICATION
Input signal:
1 point
Input type
Input signal
Input resistance
Voltage
1 to 5V DC
1MΩ or over
Current
4 to 20mA DC
250Ω
OUTPUT SPECIFICATION
Output signal:
1 point
Output type
Voltage
Output signal 1 to 5V DC
Allowable load 15kΩ or over
resistance
Current
4 to 20mA DC
600Ω or less
POWER SUPPLY
Power supply: 24V DC (20 to 30V DC)
24V AC, +13%, –10%, (47 to 63Hz)
100V AC (85 to 132V AC /47 to 63Hz)
200V AC (187 to 264V AC /47 to 63Hz)
as specified.
Power consumption:
Approx. 2W (at DC power)
Approx. 6VA (at AC power)
OPERATION CONDITION
Ambient temperature:
0 to 50°C
Ambient humidity:
Less than 90%RH (no condensation)
Outline dimension (HxWxD):
96 x 52 x 130mm
Mass:
Appox. 300g
Housing:
Plastic housing (color: black)
Mounting method:
Panel mounting or DIN rail mounting
CHARACTERISTICS
Accuracy:
Less than ± 0.1% of full span
Response time: Less than 0.1 sec. (90% response)
Dielectric strength:
1500V AC, 1 min.
(Input - Output - Power- Ground)
Insulation resistance:
500V DC, 100MΩ or over
(Input - Output - Power)
Ambient temperature effect:
Less than ± 0.1% of full span/10°C
Power regulation effect:
Less than ± 0.1% of full span
CODE SYMBOLS
1 2345678
PTF Y 1
1
2
V
A
1
2
3
Description
Input signal
1 to 5V DC
4 to 20mA DC
Output signals
1 to 5V DC
4 to 20mA DC
Power supply
24V DC/24V AC (50/60Hz)
100V AC (50/60Hz)
200V AC (50/60Hz)
EDS9-23a
Date Mar. 1, 1996