English
Language : 

EDS9-22D Datasheet, PDF (1/4 Pages) Fuji Electric – FC SERIES PT TYPE CALCULATOR
FC SERIES PT TYPE CALCULATOR
DATA SHEET
The FC series PT type calculator receives 4 analog in-
puts, provides four fundamental rules of arithmetic, square
root extraction, linearizer, etc., and convert into a signal of
1 to 5V DC or 4 to 20mA DC. In addition, transmission
function is avaiable.
Its structure is plug-in style.
PTB
SPECIFICATIONS
INPUT SPECIFICATION
Input signal:
4 points
Input type
Voltage
Current
Input signal
1 to 5V DC 4 to 20mA DC
Input resistance 1MΩ or over 250Ω
OUTPUT SPECIFICATION
Output signals: 2 points
Output type
Output signal
Allowable load
resistance
Voltage
1 to 5V DC
15kΩ or over
Current
4 to 20mA DC
600Ω or less
TRANSMISSION SPECIFICATION
1. Data transmission
Interface:
RS-485
Transmission system:
Start-stop synchronous system
Transmission speed:
2400, 4800, 9600, 19200bps
Connectable units:
31 units (Max.)
Code format: Data length……8 bits (binary)
Parity bit……even, odd, none
Stop bit……one or two bits
Transmission distance:
1 km (Max.)
2. Loader
Interface:
RS-232C equivalent
POWER SUPPLY
Power supply: 24V DC (20 to 30V DC)
24V AC, +13%, –10%, (47 to 63Hz)
100V AC (85 to 132V AC / 47 to 63Hz)
200V AC (187 to 264V AC / 47 to 63Hz)
as specified.
Power consumption:
Approx. 3W(at DC power)
Approx. 6VA (at AC power)
OPERATION CONDITION
Ambient temperature:
0 to 50°C
Ambient humidity:
Less than 90%RH (no condensation)
Outline dimension (HxWxD):
96 x 52 x130mm
Mass:
Appox. 300g
Housing:
Plastic housing (color: black)
Mounting method:
Panel mounting or DIN rail mounting
CHARACTERISCTICS
Accuracy:
Less than ± 0.1% of full span
Response time: Less than 0.3 sec.
Dielectric strengh:
1500V AC, 1 min.
(Input - Output - Transmission - Power -
Ground)
Insulation resistance:
500V DC, 100MΩ or over
(Input - Output - Transmission - Power -
Ground)
CODE SYMBOLS
1 2 3 4 5 6 7 8 9 10 11
PTB W 1 - Y
1
2
W
A
B
C
D
E
F
G
P
Description
Input signal
1 to 5V DC
4 to 20mA DC
Output signals
1 to 5V DC/4 to 20mA DC
Calculating specification
Basic specification
Linearizer + root square
Deviation
Selector 1
Selector 2
Multiplication/Division
Flow rate compensation
Programmable
Power supply
1
24V DC/24V AC (50/60Hz)
2
100V AC (50/60Hz)
3
200V AC (50/60Hz)
Transmission function
R With RS-485
Loader interface
Y Without
EDS9-22d
Date Mar. 25, 1999