EDS3-135E Datasheet, PDF (1/12 Pages) Fuji Electric – cross stacK laser Gas analYZer

cross stacK laser Gas analYZer
DATA SHEET
Cross stack laser gas analyzer (ZSS) provides continuous
measurement of density of HCl contained in flue gas in an
incineration system, NH3 in denitration equipment, com-
bustion gas, CO, CO2 and O2 with quick response speed.
Due to in-situ method, Measured gas does not require the
preparation by sampling system. This analyzer can be
used under high dust conditions, so it is possible to install
upstream of the bagfilter where gas sampling is normally
difficult.
ZSS
Control unit
Features
1. Maintenance is minimized thanks to no need of gas sam-
pling devices.
2. Running cost is negligible due to having few expendable
parts.
3. Zero drift is within ±2.0%FS, and an excellent stability is
ensured for a long period of time.
4. Almost no interference by other gas component be-
cause an infrared semiconductor laser, which has exact
absorption wavelength as the measured component, is
used.
5. High speed response is available since the gas sampling
device is unnecessary.
6. High vibration resistance because the optical adjust-
ment mechanism is separated from the airtight compart-
ment, and it is easy to make a fine adjustment and large
adjustment angle.
specIFIcatIons
Measurement principle:
Non-dispersive infrared absorbance sys-
tem (NDIR)
Measuring method:
Cross-stack system (path system)
Use application: Incineration facilities, denitration
equipment, etc.
Light source: Near-infrared laser
Laser class:
Class 1 (excluding O2 meter for use in
high dust)
Outline (D × W × H) mm:
Receiver unit (180 × 400 × 200 mm)
Transmitter unit (240 × 400 (432) ×
200 mm)
Control unit (135 × 240 × 320 mm)
Mass:
Receiver/Transmitter unit: Approx.
10kg
Control unit: Approx. 8kg
Structure:
Outdoor use type, dustproofing/rainproof-
ing structure (IP65)
Box finish color: Receiver/Transmitter box: gray
Control unit cover: blue
Control unit case: silver
Receiver unit
Transmitter unit
Measurable component and range:
Component
Min. measuring
range
HCl
10 ppm
Max. measuring
range
5000 ppm
HCl+H2O (*1)
NH3
NH3+H2O (*1)
O2 (Class 1 Laser)
O2 (For use in high
dust)
50 ppm (HCl)
15 ppm
50 ppm (NH3)
4 vol%
4 vol%
1000 ppm (HCl)
5000 ppm
1000 ppm (NH3)
100 vol%
50 vol%
CO
CO (For use in high
temperature)
CO2
CO2 (For use in high
temperature)
CO+CO2
CO+CO2 (For use in
high temperature)
2.0 vol%
10 vol%
2.0 vol%
10 vol%
2.5 vol%
10 vol%
50 vol%
50 vol%
50 vol%
50 vol%
50 vol%
50 vol%
CH4
100 ppm
50 vol%
(*1) Range for H2O is fixed at 50vol%·m.
(Range in the case stack (optical path length) diameter is 1m)
Max. and min. ranges for each stack diameter
= (Max. and min. ranges when stack diameter is 1m)
÷ Stack diameter
* Stack diameter = Optical path length
(Example: In case stack diameter is 2m for HCl measurement,
Max.range: 2500ppm and min. range: 5ppm).
Material:
Receiver unit / Transmitter unit:
Aluminum, SUS316
Control unit: Aluminum
Materials of gas-contacting parts:
SUS316, BK7, FKM, PTFE, glass-cloth,
silicone
EDS3-135e
Date Apr. 1, 2011