EDS11-167A Datasheet, PDF (1/12 Pages) Fuji Electric – PUM Series Multi-loop module type Temperature controller Event input/output module [PUME]

PUM Series
Multi-loop module type _{Event input/output module [PUME]}
Temperature controller
DATA SHEET
PUME
PUME is a digital input / output module used as an auxiliary
input / output of control modules. Each module, 30mm
wide, is equipped with 8 points of digital input, 8 points of
digital output, and high-speed RS-485 port. By connecting
with PUM control modules, it realizes a compact and high-
performance system.
FEATURES
I. User-friendly structure and functions
1. Lateral connection : Max.16 units + control module 16
units = total 32 units
Simple wiring for power supply and communication
2. Detachable structure: Terminal block, main unit, and
the base part
→ Easy wiring with detachable terminal blcok
→ Main units exchangeable without re-wiring
3. Status LED for each input/output
→ Easy to monitor input / output status
4. Smart loader communication: Connect one module
and all connected modules are able to communicate
using a loader software.
II. Large scale system using high speed RS-485
1. Modbus RTU protocol for large volume communica-
tion
2. High-speed communication: Maximum 115.2kbps
3. Highly-efficient communication: Parameters dispersed
on the address map are re-allocated to contiguous
address
III. Various functions to extend control module functions
1. Digital input
(Optional feature : logic operation NOT/AND/OR)
<Functions set by DI function of control module>
- Run / Standby switch
- Auto / Remote / Manual switch
- Start timer
- Others
2. Digital output
(Optional feature : logic operation NOT/AND/OR)
- Control output (including distribution output)
- Alarm output
- Timer output
- Others
SYSTEM SPECIFICATION
1. Product type: Multi-loop module type temperature
controller
2. Module type
1) Analog module: Total maximum 16 units
a) Control module (4 loop/unit)
b) Extended input/output module
- Analog input/output module
(Input/output 4 points/unit)
- Analog input module (Input 4 points/unit)
- Analog output module (output 4 points/unit)
2) Extended input/output (digital) module:
Maximum 16 units
- Event input/output module
(Input/output ; 8 points/unit)
3) Enhanced communication module: 1 unit
3. Connecting method:
Lateral connecting with connectors
- For power supply and RS-485 communication,
any one of connected modules is required to be
connected.
4. No. of loop, input/output
1) Control loop: Max. 64
2) No.of input / output: DI 128 points / DO 128 points
EDS11-167a
Date Apr. 1, 2011