EDS11-165A Datasheet, PDF (1/16 Pages) Fuji Electric – PUM Series Multi-loop module type Temperature controller Control Module [PUMA/B]

PUM Series
Multi-loop module type
Control Module [PUMA/B]
Temperature controller
DATA SHEET
PUMA/B is a control module, which forms the core of PUM
series. Each control module, 30mm wide, is equipped with
PID control function for maximum 4 channels, 8 points of
CT input/output, and high-speed RS-485 port. By connecting
with PUM event input/output modules, it realizes a compact
and high-performance system.
PUMA/B
FEATURES
I. High-level control functions for various applications
1. Process value input, control output:
max. 4 points (4 channels independent control)
(Process value input: Insulation between channlel,
All input/output and power supply: Insulation)
2. CT input: max. 8 points
One unit can detect three phase heater break for 4
channels
3. High-speed sampling: 200ms
4. Input measurement accuracy: ±0.3%FS
5. Types of control output can be selected by 2 channels
(Relay contact / SSR drive / current linear output)
6. Analog re-transmission output function can be assigned
to current output
7. ON/OFF control, PID control Fuzzy PID control, and
Heat/Cool control
II. User-friendly structure and functions
1. Lateral connection : Max.16 units (64 channels) + event
input/output module 16 units = total 32 units
Simple wiring for power supply and communication
2. Detachable structure: Terminal block, main unit, and
the base part
→ Easy wiring with detachable terminal blcok
→ Main units exchangeable without re-wiring
3. Status LED for each control channel
→ Easy to detect error channel
4. Smart loader communication: Connect one module
and all connected modules are able to communicate
using a loader software.
III. Large scale system using high speed RS-485
1. Modbus RTU protocol for large volume communica-
tion
2. High-speed communication: Maximum 115.2kbps
3. Highly-efficient communication: Parameters dispersed
on the address map are re-allocated to contiguous
address
IV. Various functions to realize high-performance system
1. Alarm function (output from event I/O module)
2. Power distribution function (with event I/O module):
Power ratio can be set to multiple point output by
input/control calculation value of one channel
3. Operation mode control by digital input (with event
I/O module): Run/Standby, etc.
4. Remote operation using input, and re-transmission
output using output of connected alalog input/output
module (other stations)
SYSTEM SPECIFICATION
1. Product type: Multi-loop module type temperature
controller
2. Module type
1) Analog module: Total maximum 16 units
a) Control module (4 loop/unit)
b) Extended input/output (analog) module
- Analog input/output module
(Input/output 4 points/unit)
- Analog input module (Input 4 points/unit)
- Analog output module (output 4 points/unit)
2) Extended input/output (digital) module:
Maximum 16 units
- Event input/output module
(Input/output ; 8 points/unit)
3) Enhanced communication module: 1 unit
3. Connecting method:
Lateral connecting with connectors
- For power supply and RS-485 communication,
any one of connected modules is required to be
connected.
4. No. of loop, input/output
1) Control loop: Max. 64
2) No.of input / output: DI 128 points / DO 128 points
Control module specification
1. General specification
(1) Power supply: 24V DC ±10%
(2) Power consumption: Max. 3.2 W (135 mA)
[when 24V DC is applied]
(3) Insulation resistance: 20MW or more (500V DC)
(4) Withstand voltage:
Power supply ↔ all terminals
1000V AC 1 min.
Relay contact ↔ all terminals
1500V AC 1 min.
Others
500V AC 1 min.
(5) Applied standards:
UL, C-UL, CE marking, RoHS directive
[Pending for UL, C-UL marking]
EDS11-165a
Date Apr. 1, 2011