EDS11-161 Datasheet, PDF (1/12 Pages) Fuji Electric – Digital Controller COMPACT CONTROLLER M [CC-M](FIXED FUNCTION/CONTINUOUS OUTPUT TYPE)

Digital Controller _{COMPACT CONTROLLER M [CC-M]}
(FIXED FUNCTION/CONTINUOUS OUTPUT TYPE)
DATA SHEET
PDA1
The Compact Controller M (fixed function/continuous out-
put type) is a single-loop process controller.
Receiving 1 to 5V DC signals as well as those from thermo-
couples and resistance bulbs as input signals, it performs ad-
vanced controls such as PID control, square root extraction,
non-linear control, and feed forward control.
FEATURES
1. Single-loop controller with control output
The controller has a single-loop control function.
2. High visibility ensured by color graphic display
A color LCD is adopted for clear graphic displays such as
bar graph and trend displays.
3. Networking (option)
Communication can be carried out over our PLC-link (T-
link) or Modbus (RS485) network.
4. Backup (option)
In the event of a failure of the main unit, the built-in
backup operation device takes over the operation, thus
preventing adverse effect on the system.
5. Memory card (option)
The data such as process input data and control output
data can be saved in memory cards.
FUNCTIONAL DIAGRAM
External MV input (AI2)
Feed forward input (AI3)
Process value input
(PV1)
R-SV(PV2)
Pulse input switching
(DI1,DI2)
Pulse input switching
Command (DI9)
Forced M command
(DI10)
PV tracking (DI7)
External MV command
(DI5)
R-ACK(DI8)
4 to 20mA,
thermocouple/
resistance bulb
conversion
: Option
Personal computer
Communication
terminal
To other controllers
Bar graph indicator
Linearize
Filter
Square-root
extraction
Limiter
SH
R
SL
A.M
M mode
Feed forward
computation
P
I
D
Non-linear
ʵ

Ê´

Ê´
MH
Ê´
ML
Limiter
R.A
M
M mode
L mode
R
C
R mode
Fault
Alarm
Compensated PV signal (AO3)
FLT lamp
Control output (current:MI)
Control output
(voltage:AO2,AO5)
Set point transmit signal (AO4)
Manual mode output (M:DO6)
Local mode output (DO7)
Remote request (DO8)
Fault output (FLT)
High alarm output (DO9)
Low alarm output (DO10)
Deviation upper limit alarm (DO4)
Deviation lower limit alarm (DO5)
Rate of change upper/lower limit
alarm (DO3)
EDS11-161
Date Aug. 19, 2005