EDS11-158C Datasheet, PDF (1/12 Pages) Fuji Electric – PX series digital temperature controller MICRO-CONTROLLER X (48 × 48 mm)

PX series
digital temperature _{MICRO-CONTROLLER X (48 × 48 mm)}
controller
DATA SHEET
PXG4
PXG4 is a compact size temperature controller of front panel
size 48 × 48 mm. To cope with any of versatile uses as a
temperature controller, it has many input/output points and
sophisticated control functions.
FEATURES
1. Wide variety and number of input / output
1. Digital input: Up to 2 points (Up to 3 points for motor-
ized valve control)
2. Digital output: Up to 3 points
3. Control output: 4 types
Relay contact, SSR drive, voltage linear, current linear
4. Universal inputs: Thermocouple, resistance bulb, cur-
rent, voltage, mV linear
5. Remote SV input function
6. Analog re-transmission output function (for current or
voltage)
7. Motorized valve control output
2. User interface of easy-to-see indication and easy-to-use
operation method
1. Easy-to-see, large display section
2. Parameters grouped by functions
3. User key to which you can assign a function
4. Password function provided for avoiding wrong opera-
tion and protecting settings
5. Front water-proof structure (IP66 in corformity)
3. Advanced control functions to meet various applications
1. Sampling cycle 200 ms
2. Input indication accuracy ± 0.3%FS
3. Manual control function
4. Control method selectable out of 8 different types:
ON/OFF control, PID control, fuzzy PID control, self-
tuning control, PID2 control, motorized valve control
(without PFB input)
5. Heating/cooling control selectable
6. Auto tuning function
4. A variety of functions extending the possibility of tem-
perature controller
1. Guarantee soak function provided, 16 step ramp/soak
function
2. 8 PID setting pallets, 8 SV pallets capable of frequent
change of control
3. Soft start function that limits MV output when start-
ing up
4. Ramp SV function enables graduate change of SV
5. Loop burnout alarm, heater burnout alarm and various
event outputs are available in digital output (option)
6. Control standby function
7. Loader interface (RS-232C) standard provided
8. RS485 communication (option)
SPECIFICATIONS
1. General Specifications
(1) Power supply :
100 V ( - 15%) to 240 V (+ 10%) AC,
50/60 Hz
24 V (± 10%) DC. 24 V (± 10%) AC,
50/60 Hz.
(2) Power consumption:
12 VA MAX.
(3) Insulation resistance:
20 MΩ MIN. (at 500 V DC)
(4) Withstand voltage:
Power source ⇔ all terminals
1500 V AC for 1 min
Relay contact output ⇔ all terminals
1500 V AC for 1 min
Between others 500 V AC for 1 min
(5) Approvals and certification:
UL(UL873), C-UL(CSA C22.2 No.24-93 or
equivalent), CE mark(LVD : EN61010-1,
EMC : EN61326-1)
2. Input section
2.1 Process value input
(1) Number of inputs :
1 point
(2) Input setting: Programmable scale
(3) Input signal: See Table 1 (thermocouple, resistance
bulb, mV, voltage, current (With external
250Ω resistance) universal input)
(4) Standard measurement range and input type:
See Table 1
EDS11-158c
Date Apr. 1, 2011