EDS11-132B Datasheet, PDF (1/12 Pages) Fuji Electric – Digital Controller COMPACT CONTROLLER M [CC-M](PROGRAMMABLE CONTINUOUS OUTPUT TYPE)

Digital Controller _{COMPACT CONTROLLER M [CC-M]}
(PROGRAMMABLE CONTINUOUS OUTPUT TYPE)
DATA SHEET
PDA2
The Compact Controller M (programmable continuous out-
put type) is a multi-loop process controller.
It accepts 1 to 5 V DC and signals from thermocouples and
resistance bulb as input, and is provided with abundant con-
trol and computation functions to allow configuring a flex-
ible system with a high cost performance.
FEATURES
1. Multi-loop controller of up to 4 control outputs.
CC-M has max.4 control outputs,that is real 4-loop multi-
loop controller.
[Note] In this data sheet, the term "loop" is used in the
same meaning as the quantity of control output.
2. Control and computation functions dependent on wafers
Control and computation functions are implemented by
combining function-software packages called "WAFERS."
Since the WAFERS are built in the controller, optimum
system can be programmed by using the front-panel keys
and the PC based configurator.
3. High visibility ensured with color graphic display
A color LCD is adopted for graphic display of multi-loop
bar graph and trend screens,etc.
4. Communication function (option)
Fuji PLC link (T-link) are available.
5. Back-up (option)
If the controller becomes faulty, influence over the sys-
tem can be evaded by changing the built-in backup opera-
tion unit.
6. Memory card (option)
Memory card can save any data, for example process in-
put, WAFER output, etc.
SPECIFICATIONS
1. Control and Computation Functions
Control and computation functions are implemented by
combining function-software packages called "WAFERS."
Combination of WAFERS is called "WAFER connection."
CC-M comprises 100 kinds of WAFERS.
WAFER connection is made by operating the keys on the
front panel or using the PC based configurator.
(1) PID control
• Number of loops and PID
: Selectable among the following
1 loop (1 control output / 2PID)
2 loops (2 control outputs / 4PID)
4 loops (4 control outputs / 8PID)
• Proportional band (P)
: 1.0 to 3276.7%, set at 3000.0% for de-
livery
• Integration time (I)
: 0.1 to 3276.7 s, set at 3000.0 s for deliv-
ery
• Derivative time (D)
: 0.0 to 900.0 s, set at 0.0 s for delivery
(2) Programming function
• Programming method
: WAFER connection
• Program capacity
: 48 WAFERS x 4 loops (max. 192 WA-
FERS)
A maximum of 48 WAFERS usable in 1
loop
• Kind of wafer : 100 kinds listed in Table 1
EDS11-132b
Date July 15, 2005