EDS11-130 Datasheet, PDF (1/6 Pages) Fuji Electric – GRAPHIC PROGRAM CONTROLLER (2CH)

GRAPHIC PROGRAM CONTROLLER (2CH)
DATA SHEET
PVH
This controller is a multi-function/high-performance program
controller developed on the basis of many years of delivery
records in the field of various industry machines used for
temperature control. It assures program control with high
accuracy, and is capable of using with many types of small
production equipment. Also, it provides PLC (Programmable
Logic Controller) link function for easy application to FA
system, and is ideally used as a component of realizing CIM
system.
FEATURES
1. Complete monitoring operation with full-graphic
display
• Two-channel operating condition can be monitored in
real time. The pattern graph is blackened out with
the lapse of time so the progress of operation can be
checked at a glance.
• The name of process being performed corresponding
to time signal can be displayed (up to 100 names can
be registered with 18 characters/process).
• The horizontal scale (step/time) of temperature pattern
display can be selected and displayed in actual pattern
format.
2. Program pattern (199 patterns (2700 steps, max)
setting function
This function is ideally suited for machines requiring a
large number of patters such as for small production
systems.
3. Adoption of memory card
• Simple and positive program control
Programs can be loaded by changing IC cards
registered with programs of various items, allowing
simple and positive control of program patterns of small
production of many different articles.
• Compact data-base system
Pattern data and PID parameters registered in formerly
used PVH can be saved in IC cards for easy initial
setting to newly purchased articles.
4. Application to control of carbonization furnace and
vacuum furnace
Control of 2-process value, such as temperature/vacuum
degree, temperature/pressure, temperature/humidity,
etc., can be controlled with a single unit. The adoption
of built-in CP (Carbon Potential) calculating function which
is indispensable for control of carbonization furnace,
contributes to cost down and space-saving.
5. Application to FA system
• This controller can be used for FA system when used
in combination with Fuji's FA components.
• Lines between components are integrated by network
(T-link communication), thereby providing system
expansion which allows the user to set up FA system
step by step, from PLC to group control of machines
and to factory FA system.
• RS422A/RS485 communication
SPECIFICATIONS
Size of front panel:
144 × 144 mm
Input:
Full multi-input (see section “Input”)
Control action: Auto-tuning PID operation (normal/reverse
selection possible)
Manual operation function
Program/fixed value control
Control output:
(2 points)
 ^{• Relay contact output}
• Voltage pulse output ^{(To be set}
(for SSR drive)
 ^{according to}
• Current output
 ^{code symbols)}
IC card function (option):
Used to save program parameters in IC
card
Display system: LCD full-dot graphic display, 320 × 240
dots (with back light)
Program setting unit:
Program memory number:
199 patterns, max.
Max. step number:
2700 steps
Number of steps in 1 pattern:
99 steps, max.
Program setting range:
Time; 0.0 to 999.9 min/step, setting
resolution 0.1 min
Setting range; 0 to 100% of input scale
Setting accuracy: Less than ± 0.5 of full scale
EDS11-130
Date Dec. 20, 1998