EDS11-113D Datasheet, PDF (1/6 Pages) Fuji Electric – FC SERIES MANUAL LOADER(CONTINUOUS OUTPUT TYPE)

FC SERIES MANUAL LOADER
(CONTINUOUS OUTPUT TYPE)
DATA SHEET
The FC series manual loader is available in two types. One
is used for remote control in combination with a compact
controller, while the other is dedicated for manual operation.
This instrument is equipped with a solid state indicator and
pushbutton operation circuit to provide easy readouts and
handling for process operation by man-machine interface.
It can be directly connected to a 4 to 20mA input optionally.
FEATURES
1. High reliability
The manual loader is a solid state instrument having few
mechanical parts. The indicator and other units which
formerly consisted of mechanical parts are also designed
with solid state circuits to provide high reliability.
2. Application of international standards
The instrument is compact, and the external dimensions
comply with international IEC. The power supply and
signal also comply with IEC standards (24V, 1 to 5V DC).
Operation on 110V or 220V AC power supply is possible.
3. Front panel operation
Process values, valve position input, etc. can be read
accurately from the digital display on the panel front.
Parameter setting and manual operation are also possible
from the front of the panel.
PNB3
FUNCTIONAL DIAGRAM
Process value input
(PV)
External MV input
(Al1)
Valve position
command (EXS)
Manual mode
command (SMV)
PV
MV
Linearize
Square-root
extraction
Filter
Limiter
HL
Prearranged valve position
A
M
HM
MV
Manual
back up
HMV
FAULT
KPV
ALM
Manual mode
output (M)
Compensated
process value
signal (KPV)
Control output
(voltage) (MV)
Control output
(current) (MI)
FLT output
High alarm
output (H)
Low alarm
output (L)
EDS11-113d
Date Dec. 20, 1994