EDS11-104E Datasheet, PDF (1/4 Pages) Fuji Electric – FC SERIES MANUAL LOADER(STEP OUTPUT TYPE)

FC SERIES MANUAL LOADER
(STEP OUTPUT TYPE)
DATA SHEET
The FC series manual loader is available in two types, a
manual control type and a remote control type used in com-
bination with a compact controller.
This instrument is equipped with a solid state indicator and
pushbutton operation circuit to provide easy readouts and
handling for process operation by man-machine communi-
cation.
It can be directly connected to a thermocouple, resistance
bulb or 4 to 20mA input optionally.
FEATURES
1. High reliability
The manual loader is a solid state instrument having few
mechanical parts. The indicator and other units which
formerly consisted of mechanical parts are also designed
with solid state circuits to provide high reliability.
2. Application of international standards
The instrument is compact, and the external dimensions
comply with international IEC. The power supply and
signal also comply with IEC standards (24V, 1 to 5V DC).
Operation on 100V or 200V AC power supply is possible.
3. Front panel operation
Process values, valve position input, etc. can be read
accurately from the digital display on the panel front.
Parameter setting and manual operation are also possible
from the front of the panel.
FUNCTIONAL DIAGRAM
Process value
input (PV)
External MV input
(PI)
Valve position
input (W)
Linearize
Square-root
extraction
Filter
PV MV
Limiter
W/V
HL
A
M
MV
Manual mode
command
(SMV)
KPV
ALM
PND1
Manual mode
output (M)
Compensated
process value
signal (KPV)
Manipulated
output
(pulse width)
(PO)
High alarm
output (H)
Low alarm
output (L)
EDS11-104e
Date Jan. 27, 1999